moonstone 3dr small update
#123
managed to sell my r1 aswell which to be honest im not happy about selling but needs must
once the bikes been payed for ill look into getting the fuel tank powder coated and ill update then .
#127
not alot mate,i bought a new fuel filter with -6 fittings,also bought a carbon cam belt cover,ill put some pics up when ive collected it from the post office,also fucked me drill on saturday while polishing the back box,thats the second one ive broke since i bought the car.
#130
DURHAM RSOC
iTrader: (1)
exactly the same place mate hasnt moved atall since mot getting proper annoyed ive got plenty money in the bank but wont take my card on paypal ect been tryong to order me sensor cambelt/tensioner and bearings ect to get that done but wont let me and been speaking to karl at nms he says it defo needs a setup before i do serious damage but its 3 hours away i cant get there without driving it so my father in law apperntly good mates with r and p woods of heaton and reckons theyl do it if i want but im not sure i suppose they could just get the fueling ect sorted so its safe until i can get to nms you reckon?
Last edited by scottyrs; 24-01-2011 at 08:27 PM.
#135
i might put a little bit here and there,tbh ill have to wait and see what it looks like once its on the car,this year im going to have to invest in a mig welder and a compressor for when i start the underside but i cant see it going back together this year,just had my accountant on the phone,recon im due a 2k rebate for last year so maybe i could crack on a little.
#137
10K+ Poster!!
This thing is going to be a seriously smart car when its done (and its already looknig real nice.)
#142
not alot mate dropped some parts into powder coaters on saturday will post pics up when i get them back,took my fuel tank into a company in hebburn during the week to get my jic fittings welded on,but they've welded them on wrong which means the fittings will leak so ill be taking that back tommorrow.heres some pics off the tank.
really anyone in the motorsport buisness would know that that will not seal properly.
really anyone in the motorsport buisness would know that that will not seal properly.
#149
small update collected parts from powder coaters this morning.
fuel pump craddle:from this
to this:
brake caliper brackets,from this
to this:
strut brace mounts:
the strut brace centre section was stripped of paint and will be polished soon.
abs bracket:from this
to this:
and with map sensor bracket:
hope you like.
fuel pump craddle:from this
to this:
brake caliper brackets,from this
to this:
strut brace mounts:
the strut brace centre section was stripped of paint and will be polished soon.
abs bracket:from this
to this:
and with map sensor bracket:
hope you like.
#153
not alot mate,been working on the house instead of the car the last couple of weeks,i have managed to get the tank back which im happy with,also had some camshaft oil seals turn up.would like to get them done this weekend if i can,but tiling the kitchen comes first though.
#155
been to powder coaters this morning and theres good and bad news,first off the good news heres what i collected.
done a great job.
now the not so good news regarding my fuel tank,this is how it looked after being blasted
looks good you might think,can you see the problem?
42 pin holes,ive organised these to be brased up next week,no big deal really just a little set back.
as i was taking pics of the fuel tank i thought id include a pic of the swirl pot,still hoping this will not melt in the oven when it goes back,fingers crossed.
done a great job.
now the not so good news regarding my fuel tank,this is how it looked after being blasted
looks good you might think,can you see the problem?
42 pin holes,ive organised these to be brased up next week,no big deal really just a little set back.
as i was taking pics of the fuel tank i thought id include a pic of the swirl pot,still hoping this will not melt in the oven when it goes back,fingers crossed.
#158
ive used these for a while now brammer,he does alot of car parts and always gives a quality job.
http://www.bettablast.co.uk/bettablast/home.html
todays work,dropped the rear axel down and stripped it ready to be powder coated,seem to spent alot of time and money there recently.
these where fooked.
also found time to strip the rear bearings out,housing also to be powder coated.
http://www.bettablast.co.uk/bettablast/home.html
todays work,dropped the rear axel down and stripped it ready to be powder coated,seem to spent alot of time and money there recently.
these where fooked.
also found time to strip the rear bearings out,housing also to be powder coated.
Last edited by cozzy jeff; 13-03-2011 at 05:25 PM.
#159
Regular Contributor
Join Date: Mar 2007
Location: Motherwell , Scotland
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
that swirl pot will melt mate i never done my tank because of it and iam a coater myself check out some of the work i do www.customcoatingsuk.com