Cosworth 4x4 bonnet vents...hen's teeth?
#1
15000
Thread Starter
Join Date: May 2014
Location: Edinburgh
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Cosworth 4x4 bonnet vents...hen's teeth?
Hi folks,
I'm restoring a 2wd saph and the bonnet had some rot, so I've gone down the 4x4 bonnet route as a replacement. The guy who sold me the bonnet wouldn't sell the vents with the bonnet as he was going to use them again, so I took the bonnet without the vents, assuming that they'd be easy enough to pick up.
Can't find a set anywhere! Any ideas?
Cheers,
Brian.
I'm restoring a 2wd saph and the bonnet had some rot, so I've gone down the 4x4 bonnet route as a replacement. The guy who sold me the bonnet wouldn't sell the vents with the bonnet as he was going to use them again, so I took the bonnet without the vents, assuming that they'd be easy enough to pick up.
Can't find a set anywhere! Any ideas?
Cheers,
Brian.
#2
Regular Contributor
hi
Hi folks,
I'm restoring a 2wd saph and the bonnet had some rot, so I've gone down the 4x4 bonnet route as a replacement. The guy who sold me the bonnet wouldn't sell the vents with the bonnet as he was going to use them again, so I took the bonnet without the vents, assuming that they'd be easy enough to pick up.
Can't find a set anywhere! Any ideas?
Cheers,
Brian.
I'm restoring a 2wd saph and the bonnet had some rot, so I've gone down the 4x4 bonnet route as a replacement. The guy who sold me the bonnet wouldn't sell the vents with the bonnet as he was going to use them again, so I took the bonnet without the vents, assuming that they'd be easy enough to pick up.
Can't find a set anywhere! Any ideas?
Cheers,
Brian.
#6
PassionFord Post Whore!!
Become a gold member and post a wanted thread!!!
Trending Topics
#8
PassionFord Post Whore!!
#10
15000
Thread Starter
Join Date: May 2014
Location: Edinburgh
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help and input folks. Hopefully buying Marky G's spare set.
The original 2WD bonnet was rotten on the front leading edge, so no good to repair. I was going to get another 2wd bonnet, but a 4x4 one became available for buttons so I went for it just now until the car is finished. I'll probably put a non-vented bonnet back on at some stage once the car is back on the road.
Cheers,
Brian.
The original 2WD bonnet was rotten on the front leading edge, so no good to repair. I was going to get another 2wd bonnet, but a 4x4 one became available for buttons so I went for it just now until the car is finished. I'll probably put a non-vented bonnet back on at some stage once the car is back on the road.
Cheers,
Brian.
Thread
Thread Starter
Forum
Replies
Last Post
Anutternutter
Ford Sierra/Sapphire/RS500 Cosworth
2
21-08-2015 06:07 PM
charliecosworth
Ford Sierra/Sapphire/RS500 Cosworth
3
19-08-2015 02:00 PM