Cosworth Anti Camber shims
#1
Too many posts.. I need a life!!
Thread Starter
Cosworth Anti Camber shims
I am after some Anti camber shims for the rear axle on a saph cosworth.
Has anyone some for sale or where's the best place to buy them.
Cheers
Has anyone some for sale or where's the best place to buy them.
Cheers
#2
PassionFord Post Troll
I'm sure I seen some on R&B Motorsports website
#4
PassionFord Post Troll
#6
Fast Ford snapper
Did have a more extreme set years ago, but they made a very low car sit at almost zero camber, probably be overkill and go positive on a higher car!
#7
Too many posts.. I need a life!!
There are several designs out there that doesn't fit without the stub shaft rubbing (on 2wd anyways), so I designed and got a pair made. I designed these based on the drawings on here, but I found that the actual drawing of the part doesn't match the measurements on it lol.
The measurements are, however, accurate, and the design works. Will post a pic of my drawing later.
For those of you worried that the shims introduce bending moment on your bolts, simply fit some of these spherical washers. Bolts don't like bending, so they're a good fix.
https://www.ganter-griff.com/en/prod...-washers-Steel
The measurements are, however, accurate, and the design works. Will post a pic of my drawing later.
For those of you worried that the shims introduce bending moment on your bolts, simply fit some of these spherical washers. Bolts don't like bending, so they're a good fix.
https://www.ganter-griff.com/en/prod...-washers-Steel
Last edited by nixon_2wd; 19-11-2016 at 04:14 PM.
The following 2 users liked this post by nixon_2wd:
Robmatheson (21-11-2016),
rooos (04-12-2016)
Trending Topics
The following users liked this post:
rooos (04-12-2016)
The following users liked this post:
rooos (04-12-2016)