Rossy43

Had an oil pressure and water temp gauge installed in the Cosworth.

Just after some guidelines on 'expected' oil pressures. Like cold, hot, kicking its head in etc?? And also what do you normally see Cosworths run at water temp wise?

Basically if I know ball part figures it makes the guages useful so I can see any changes. Thanks alot.

Ridgey

iTrader: (5)

My own experience.

Oil (Mobil1 Motorsport) on std oil pump:
Cold running 70psi
Hot running 50psi
Hot idle 25-30psi

High pressure oil pump ADD 20psi to the running pressures

nicksaph

mines got very similar pressure readings as above but my cold running is 60psi.

that on castrol edge 10/50

water temp runs between 90 - 100deg

Rossy43

Very helpful boys. Thankyou. I use mobil 10-60 with standard stuff so this is ideal.