chrisreid

iTrader: (2)

im away to buy a set of ap racing brakes but not sure what the max size of brakes i can get under my 17inch OZ MAGS (ET35). would the 6pot 330 fit with any probs

rinus_2005

iTrader: (1)

6pots on 330's? imo a bit overkill calipers. but would most deffo fit, even a 4x4 or is it a 2x4?

rapidcossie

might struggle mate...

Ridgey

iTrader: (5)

Struggle with what ????
Width of caliper clearance on wheel spokes maybe?
330 disks should easily go under any 17" wheel.

chrisreid

iTrader: (2)

i have a 4x4. i ment to say 355's and 6pots. maybe 355's wil be to tight

xr_craig

iTrader: (2)

I reckon 355's will be too tight mate, i run 355's and 6pots on my 4x4 and tried a 8x17 ET35 Comp MO on and it wouldn't clear the caliper.

Paul_RS

iTrader: (4)

Niall has the Reyland/Rainbird 356, 6 Pot kit on his 3 door. He has 17" 6 Spoke MOs on it. Think they are 7 1/2" or 8" wide, can't remember. I'll get pics up tomorow.

jon@work

iTrader: (5)

But is that using 4x4 front hubs? That is where the problem is - the steering arm on 4x4 hubs is too close to the wheel mounting face, meaning you can't use a large offset bell.

charlie luciano

iTrader: (3)

4x4 saphs are a pain in the rear end to fit big brakes trust me I know, the trick is to get the right offset on the wheel, speak to someone like Mike Rainbird or Reylands to sort you out a set of alloys that you will get the big anchors under them


Luciano

Paul_RS

iTrader: (4)

I should read the posts more carefully

Nialls is a 3 door, so no use whatsoever lol.

Martin-Hadland

iTrader: (2)

I have managed to get 355's inside 8x17 Comps but using a Brembo caliper... It's very tight though.

rapidcossie

i run 355 with ap6 pots on a 17" MO et40 had to trim a very small amount of caliper but it fits ok

JTECH James

iTrader: (13)

im about to try and get 350's under my 18" oz chronos and im not sure if they will clear the caliper