Very good Engine parts!
#1
PassionFord Regular
Thread Starter
Very good Engine parts!
I will get Pics up next week as I`m travelling at the moment but here we go:
Small Turbo Plenum (no TB) £175
Very good set of low mileage conrods £150
L8 ECU with MSD chip, Siemens Black 83lb low impedance injectors done 5000miles at most. GT3067r .82 internally gated done at most 6000miles, no play. I want these to go together £1400
Very good 2wd cylinder head COMPLETE on 138.5mm £600
4wd cylinder head bare 500BHP spec (Karl Norris) tiny hairline crack (pressure tests fine) and a little det damage £300
Apexi Avcr boost controller complete. Great bit of kit £230
Probably missed a few bits and pieces but that`s the broad strokes.
Small Turbo Plenum (no TB) £175
Very good set of low mileage conrods £150
L8 ECU with MSD chip, Siemens Black 83lb low impedance injectors done 5000miles at most. GT3067r .82 internally gated done at most 6000miles, no play. I want these to go together £1400
Very good 2wd cylinder head COMPLETE on 138.5mm £600
4wd cylinder head bare 500BHP spec (Karl Norris) tiny hairline crack (pressure tests fine) and a little det damage £300
Apexi Avcr boost controller complete. Great bit of kit £230
Probably missed a few bits and pieces but that`s the broad strokes.
#3
PassionFord Regular
Thread Starter
Chip was written for BD14 in standard exh.
Not sure which direction I'm going in yet.
Maybe 2.2 stroker on BW twin scroll with link ECU maybe something about 430bhp ish but on a gt28. Not sure!
Not sure which direction I'm going in yet.
Maybe 2.2 stroker on BW twin scroll with link ECU maybe something about 430bhp ish but on a gt28. Not sure!
#6
PassionFord Regular
Thread Starter
There is a picture of the 4x4 head on my PH thread:
http://mobile.pistonheads.com/gassing/topic.asp?h=0&f=66&t=1376622&i=120&mid=169322&nmt= intercooling
http://mobile.pistonheads.com/gassing/topic.asp?h=0&f=66&t=1376622&i=120&mid=169322&nmt= intercooling
Trending Topics
#12
PassionFord Regular
Thread Starter
With the right supporting mods I would say a shade over 500bhp, maybe up to 520? Was set up for 4x4 ported head on standard comp.
Thread
Thread Starter
Forum
Replies
Last Post
track.focus'd
Restorations, Rebuilds & Projects.
26
12-08-2015 05:53 PM
Zoggon
Ford Sierra/Sapphire/RS500 Cosworth
5
10-08-2015 10:39 AM