Billy_RS

iTrader: (5)

If you are reading this and you are using one of burton powers adjustable bias assembles I need a big favour from you please....

One of these...
http://www.burtonpower.com/parts-by-...rs-brk060.html


I need to know the measurement from the bulk head to the furthest point forward.

I also need to know if it could be modified to fit on the drivers side directly behind the brake pedal itself (eliminating the use of the cross bar thing)

Hope someone can help, thanks in advance

Billy

Sonic Boom

iTrader: (11)

It's made by CompBrake mate so you'll get it cheaper if you go straight to them, is it to go on your Sapp?
I got CompBrake to make one that bolts straight on to a Sierra bulkhead, mines all fitted up now, I can take any measurements you need it works really well:







Rich

Sonic Boom

iTrader: (11)

Just realised it's probably going on an Escort if you want to get rid of the "cross bar thingy" can't see why not mate.
Give David @ CompBrake a bell he's the man to talk to he sorted all mine out and was very helpful.
Rich