r77smith

Hi there, I've got a mk6 rs2000 with a tubular exhaust manifold. It's been bolted together on the downpipe section by the previous owner but I think it should have springs to allow for flex. I wanted to know if my thoughts are correct and if possible if anyone knows of somewhere I'd be able to get some, any info would be great. Thanks, Robert

STeve

iTrader: (11)

not seen flexi bolts on a rs2k only on zetecs like normal 1.6/1,8s as normally the manifold and downpipe are one piece on the rs2k

r77smith

Thanks, probably best to see if zerec ones similar and go from there. Thanks again

Paul_RS

iTrader: (4)

There were no springs anywhere on my RS 2000

mothrs2k

Is it an aftermarket manifold?

rs_daz

Are you talking about a flexy pipe on the end of the manifold?