PassionFord - Ford Focus, Escort & RS Forum Discussion
I’m expecting a noticeable difference in sound quality with the replacement rear speakers.
I’m expecting a noticeable difference in sound quality with the replacement rear speakers.
0 2024/01/20 05:41:54
Re-taped the loom after the fuel pump re-wire.
Re-taped the loom after the fuel pump re-wire.
0 2024/01/20 05:41:47
Also moved my Ctek charger point from under the bonnet to Velcro’s to the front crossmember. Opening the bonnet became too much hassle 🤣
Also moved my Ctek charger point from under the bonnet to Velcro’s to the front crossmember. Opening the bonnet became too much hassle 🤣
0 2023/12/01 07:34:12
This will make the gauge read hot.
This will make the gauge read hot.
0 2023/12/01 02:55:03
This will make the gauge read normal
This will make the gauge read normal
0 2023/12/01 02:54:58
0 2023/11/19 03:35:28
0 2023/09/10 06:29:34
0 2023/09/01 08:29:57
I didn’t like the filter on the inner wing with the hoses looping around the inlet.
I didn’t like the filter on the inner wing with the hoses looping around the inlet.
0 2023/08/25 09:47:24
0 2023/05/28 00:48:45
This was ridiculously loud and on split rim wheels.
This was ridiculously loud and on split rim wheels.
0 2023/05/23 01:04:58
Top trump
Top trump
0 2023/05/23 01:04:52
There was a singer 911 here too but never got a picture. A few RR Cullinins It’s the car park for the Super yacht owners.
There was a singer 911 here too but never got a picture. A few RR Cullinins It’s the car park for the Super yacht owners.
0 2023/05/23 01:04:46
Hideous
Hideous
0 2023/05/23 01:04:37
I used hose separators for cable management.
I used hose separators for cable management.
0 2023/01/05 01:08:34
I’ve water.
I’ve water.
0 2023/01/05 01:08:25
The temperature sensors I bought didn’t come with a calibration table so boiling water , ice water and ambient temperature and measure the resistance.
The temperature sensors I bought didn’t come with a calibration table so boiling water , ice water and ambient temperature and measure the resistance.
0 2023/01/05 01:08:19
Decided to add an ambient temperature sensor and mounted it on my horn bracket.
Decided to add an ambient temperature sensor and mounted it on my horn bracket.
0 2023/01/05 01:08:13
Again my ECU doesn’t have closed loop control so I have this board from DIY EFI
Again my ECU doesn’t have closed loop control so I have this board from DIY EFI
0 2023/01/05 01:08:07
The little board wired with connectors. As far as we can tell it’s all working.
The little board wired with connectors. As far as we can tell it’s all working.
0 2023/01/05 01:08:02
All wired up.
All wired up.
0 2023/01/05 01:07:54
Probably because I bought the wrong ECU I’ve added this CanCheck expansion board for extra inputs.
Probably because I bought the wrong ECU I’ve added this CanCheck expansion board for extra inputs.
0 2023/01/05 01:07:46
PWM fan control proven.
PWM fan control proven.
0 2022/12/17 21:46:20
Solid state relay from Maxx that can switch DC
Solid state relay from Maxx that can switch DC
0 2022/12/17 21:46:13
Only the crank signal is left to prove
Only the crank signal is left to prove
0 2022/12/17 21:46:04
Wiring is progressing. I will wrap it when it working.
Wiring is progressing. I will wrap it when it working.
0 2022/12/17 21:45:55
Stealth catch can.
Stealth catch can.
0 2022/09/15 04:59:00
This part is on the block. It’s a nicely machined piece.
This part is on the block. It’s a nicely machined piece.
0 2022/09/15 04:58:53
0 2022/04/25 07:35:41
0 2022/04/08 07:19:37
0 2022/04/08 07:19:27
0 2022/04/08 07:19:17
My new cover
My new cover
0 2022/04/08 06:38:36
Yet another picture on the ramp at pro grip.
Yet another picture on the ramp at pro grip.
0 2022/04/08 06:38:29
0 2022/04/08 06:38:20
0 2022/03/06 07:22:42
0 2022/03/06 07:22:30
0 2022/03/01 07:46:03
The all important towing eye🤣 Nothing is tightened
The all important towing eye🤣 Nothing is tightened
0 2022/03/01 07:45:54
0 2022/03/01 07:45:47