PassionFord - Ford Focus, Escort & RS Forum Discussion
0 2018/05/19 00:50:46
Reminds me of this
Reminds me of this
0 2018/05/19 00:50:44
Nice set of billet pulleys arrived, I will post up the other ones Mark sent me (Thank You)
Nice set of billet pulleys arrived, I will post up the other ones Mark sent me (Thank You)
0 2018/05/18 07:03:26
They have travelled about 8 of those post and rails from where it went through.
They have travelled about 8 of those post and rails from where it went through.
0 2018/05/11 07:01:28
0 2018/05/11 06:57:21
0 2018/05/10 08:21:15
Clever little mod by Mark, (nice surprise today) easy to remove the diff using just two rear and two front bolts then unbolt the prop. We have been discussing a windowed diff cover.
Clever little mod by Mark, (nice surprise today) easy to remove the diff using just two rear and two front bolts then unbolt the prop. We have been discussing a windowed diff cover.
0 2018/04/25 07:56:03
Dummy supra diff in the T45 cradle, I have the supra billet diff cover to go on already
Dummy supra diff in the T45 cradle, I have the supra billet diff cover to go on already
0 2018/04/25 07:56:02
Should be around 8-10 kilos lighter than a normal rear beam plus no diff fitting kit.
Should be around 8-10 kilos lighter than a normal rear beam plus no diff fitting kit.
0 2018/04/25 07:56:00
0 2018/04/25 07:55:59
0 2018/04/25 07:52:31
5.7 kilos of weight saving across standard to normal flanges....that is a BIG saving in unsprung weight. Very happy
5.7 kilos of weight saving across standard to normal flanges....that is a BIG saving in unsprung weight. Very happy
0 2018/04/25 07:52:30
You can just see the tiny boxes from Before, these did not leave any room for adjustment and probably were moving as the shell didn’t have much strength there before and the old cage only bolted in where the back seats would have been
You can just see the tiny boxes from Before, these did not leave any room for adjustment and probably were moving as the shell didn’t have much strength there before and the old cage only bolted in where the back seats would have been
0 2018/04/25 04:54:55
New rear strut towers
New rear strut towers
0 2018/04/25 04:54:47
Hubs on the bench
Hubs on the bench
0 2018/04/24 03:58:54
Lightened CV joints WRC style, these will also have titanium bolts too.
Lightened CV joints WRC style, these will also have titanium bolts too.
0 2018/04/24 03:58:53
7075 hubs, hard anodised
7075 hubs, hard anodised
0 2018/04/24 03:58:51
This is fully ported 27cc, I have about 4 more.
This is fully ported 27cc, I have about 4 more.
0 2018/04/23 11:26:22
Marder on right, 27cc in middle and 32 cc on left, I have one nearer 10bhp but no pics
Marder on right, 27cc in middle and 32 cc on left, I have one nearer 10bhp but no pics
0 2018/04/23 11:26:16
Sold the front one, rear is brushless and lipo power, front one never seen any power
Sold the front one, rear is brushless and lipo power, front one never seen any power
0 2018/04/23 11:26:10
Wide track. 7 bhp engine
Wide track. 7 bhp engine
0 2018/04/23 11:26:04
Brand new, lots of good bits and run once
Brand new, lots of good bits and run once
0 2018/04/23 11:26:00
One part build
One part build
0 2018/04/23 11:25:54
0 2018/04/22 08:10:21
Again, you can pick these up with one hand very easily
Again, you can pick these up with one hand very easily
0 2018/04/22 08:06:26
Drivers door now with window and furniture fitted, these are silly light. I quite like it in white and keep thinking of having full white T16 with rally livery wrap but the car has always been known as Red.
Drivers door now with window and furniture fitted, these are silly light. I quite like it in white and keep thinking of having full white T16 with rally livery wrap but the car has always been known as Red.
0 2018/04/22 08:06:08
Whole bootlid held on 1 finger and outstretched arm
Whole bootlid held on 1 finger and outstretched arm
0 2018/04/20 08:10:07
Carbon Kevlar bootlid saves 25kg, Lexan marguard, my 205 panel will fit and lock etc all work as normal.
Carbon Kevlar bootlid saves 25kg, Lexan marguard, my 205 panel will fit and lock etc all work as normal.
0 2018/04/20 08:09:58
This bit needs a lot of work.
This bit needs a lot of work.
0 2018/04/20 08:03:31
I prefer the shape of this to the other but I think it will take a lot of fibreglass skill to pull it off well. The t16 rally car had struts bolted to the back to stop flex.
I prefer the shape of this to the other but I think it will take a lot of fibreglass skill to pull it off well. The t16 rally car had struts bolted to the back to stop flex.
0 2018/04/20 08:03:24
The sides will need a lot of work to look right on the 205 shell
The sides will need a lot of work to look right on the 205 shell
0 2018/04/20 08:03:14
T16 spoiler taped to the grey pug
T16 spoiler taped to the grey pug
0 2018/04/20 08:03:04
Looks nice in black
Looks nice in black
0 2018/04/20 08:00:59
Couple of pics for Florent, nice to speak to you today
Couple of pics for Florent, nice to speak to you today
0 2018/04/20 08:00:58
T45 lightweight cradle to Marks design getting measured up so the cage can locate on the mounting points, this will take the supra diff directly....I love the simplicity of it and saves a chunk of weight in this metal over the beam setup. (Cheaper alternatives are available, lol)
T45 lightweight cradle to Marks design getting measured up so the cage can locate on the mounting points, this will take the supra diff directly....I love the simplicity of it and saves a chunk of weight in this metal over the beam setup. (Cheaper alternatives are available, lol)
0 2018/04/20 04:27:17
I had to turn up some alloy sleeves to help locate the wing mirror, I will add an alloy sandwich plate as the Kevlar is pretty thin there, I am hoping to do away with the internal adjusters as I never move them.
I had to turn up some alloy sleeves to help locate the wing mirror, I will add an alloy sandwich plate as the Kevlar is pretty thin there, I am hoping to do away with the internal adjusters as I never move them.
0 2018/04/17 09:18:38
You can see the weave on the inside
You can see the weave on the inside
0 2018/04/17 09:18:27
You can see the wing mirror in this pic
You can see the wing mirror in this pic
0 2018/04/17 09:18:20
I test fitted the windows today, pleased with the results.
I test fitted the windows today, pleased with the results.
0 2018/04/17 09:18:09
0 2018/04/15 05:18:16