2024 FORD EDGE Recalls
Recall information provided by National Highway Traffic Safety Administration
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321368
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 21-22MY Bronco
Manufacturer-Supplied Component Part Number: MU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321369
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 21-23MY Edge
Manufacturer-Supplied Component Part Number: NU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321370
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 22-24MY Bronco
Manufacturer-Supplied Component Part Number: PU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321371
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 24MY Edge
Manufacturer-Supplied Component Part Number: RU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321372
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 25MY Bronco
Manufacturer-Supplied Component Part Number: SU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 321373
Campaign Number: 26V124000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 26S09
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 849310
Date Owner Notified: Apr 13, 2026
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: Mar 3, 2026
Record Creation Date: Mar 4, 2026
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.
Consequence: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.
Notes: N/A
Recall Component ID: 000261048005595484000001881
Manufacturer-Supplied Component Name: APIM (Accessory Protocol Interface Module)
Manufacturer-Supplied Component Description: Sync 4 mid/high variant – 26MY Bronco
Manufacturer-Supplied Component Part Number: VU5T-14G670-XXX
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 304824
Campaign Number: 25V315000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 25S49
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1076138
Date Owner Notified: Oct 8, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 14, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128249005595484000001881
Manufacturer-Supplied Component Name: Accessory Protocol Interface Module (APIM)
Manufacturer-Supplied Component Description: MOD.ASY.SCL.CONN.M/MEDIA
Manufacturer-Supplied Component Part Number: PU5T-14G682-*
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SOFTWARE
Running Sequence Number: 304825
Campaign Number: 25V315000
Make: FORD
Model: EDGE
Year: 2024
MFR Campaingn Number: 25S49
Component Name: BACK OVER PREVENTION: SOFTWARE
Manufacturer: Ford Motor Company
Begin Date of Manufacturing: N/A
End Date of Manufacturing: May 3, 2024
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 1076138
Date Owner Notified: Oct 8, 2025
INFLUENCED_BY: ODI
Manufacturers of Recalled Vehicles: Ford Motor Company
Report Received Date: May 14, 2025
Record Creation Date: May 12, 2025
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Consequence: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 888-327-4236 (TTY 888-275-9171) or go to nhtsa.gov.
Recall Component ID: 000128249005595484000001881
Manufacturer-Supplied Component Name: Accessory Protocol Interface Module (APIM)
Manufacturer-Supplied Component Description: MOD.ASY.SCL.CONN.M/MEDIA
Manufacturer-Supplied Component Part Number: NU5T-14G682-*
Do Not Drive: No
Park Outside: No