Hi people, Do any of you have any tips for refitting the front TCA's and ARB after replacing all bushes with polybushes

Thanks in advance

 

Get yourself over to www.escortrscosworth.com plenty of helpful chaps on there mate.

 

ratchet straps are a good aid!

 

It can be done without straps, I've never needed any, put the arb loosely in the tca, just put nut on 1 turn, connect arb to the chassis mounts, now use a jack and slowly lift the tca, you will find a position where it is closest to the inner hole, medium size strong screwdriver in hole to align, bash in with hammer if needed to help tca home, the last side will be hardest as the arb works against you, I did try leaving the arb unattached at the arb clamps but was no easier, so do it as above.
Don't know how many sets I've done but not a strap in sight, but if you find it easier with one use one.
tabetha