Help Needed: MK 5 fiesta zetec s throttle body vacuum pipes
hi guys im new to the forum and ive found myself in a bit of trouble and was hoping that i might find some help here, so here goes my first post :grin:
im building (well nearly completed) a puma 1.7 zetec engine conversion into the fiesta, im using the fiesta zetec s throttle body but cant recall where the two pipes on the throttle body go to. I have one going to the FPR, but no idea about the other one! i have so many pipes lying about in my garage and i just dont know which is the right one or where it leads to! I have been searching on the internet for hours on end trying to find pictures of the throttle body connections or any information that will tell me but i have had no luck at all :cry: if any of you guys have any information regarding this it would be greatly appreciated cheers :grin: |
Don't know about your individual set up, but maybe the tb you now use uses a different amount of connections from the tb ?
tabetha |
they may do but even when i block it off i still have eratic idle
|
Measure the vacuum at idle, and see what it is, soon tell you if it has a leak, don't forget the pcv valve can stick open, just clamp pipe with pliers to see if it has, should be shut at idle, but if open will cause havoc.
tabetha |
hello mate i am looking at doing the same conversion my self as i have both the puma and fiesta all intact so i will have a look sometime this week if that of any help to you if you pm me a number then i should be able to text a pic or two
|
All times are GMT. The time now is 03:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands