does anyone know the above, and what max bhp they fuel for?

i should soon be getting a FRP exhaust system and 4-2-1 manifold, piper FRP spec cams and im gonna make some bike throttle bodies fit it too

but i need to know what the max bhp the std injectors can flow as they are gay side fed efforts...

ta

 

if you are using throttle bodies then why not use the injectors in those? im got a focus 1.6 and the injectors would not flow enough fuel for mine, and im running cams headwork and throttle bodies so i used the bike ones insted and they are fine, are the puma ones in the head or on the inlet?

 

puma ones are in the head mate, im pretty sure they will be ok as the thing wont see any more than around 170bhp tops i reckon

pretty sure they use the same injectors ont he FRP and they are 150bhp out the box

i need to use the holes in the tb's where the bike injectors go for the brake servo vac

 

i see, if they are the same as frp ones then should be fine i would think, carnt you tee into the inlet for the servo thats what i did with mine, if you do that i know where you can get some blanking plugs for the head where the ford injectors used to sit

 

it wont have an inlet mate if i rub tb's, it will need a vac take off from each cylinder and the injector holes are ideal