does anyone know the correct procedure to bleed brakes on a 2wd saff.
cheers
steve

 

I just do mine using the ABS pump starting with nearest and working next nearest etc, always works for me.
tabetha

 

turn ignition on and bleed fronts as normal ie pressing up/down a few times and then holding down open nipple and see the fluid flow out without any bubbles the rears will bleed by opening the nipples one at a time on the caliper and pressure from pump will push fluid along with any air out just make sure reservoir's topped up.

 

Im the daddy at bleeding brakes apparently

(See my siggy)

 

note to self-do NOT take brake bleeding advice from this person lmao