LEGO builds/rebuilds/projects - loads of um!
19-04-2018, 11:53 AM
#761
10K+ Poster!!
Nice update Kev, glad you liked the build.
I think I may have some odds and sods of left over bits, I will post them up if they are any use for your spares bin.
I think I may have some odds and sods of left over bits, I will post them up if they are any use for your spares bin.
The following users liked this post:
Minirotty (19-04-2018)
19-04-2018, 04:43 PM
#762
Lucifer II - 666
Thread Starter
Thanks man can never have to many spares man haha defo as I’m going to attemptnto build my own design truck from scratch!
19-04-2018, 04:45 PM
#763
Lucifer II - 666
Thread Starter
This is the show if anyone wants to go...
The following users liked this post:
PaulinhoT (24-04-2018)
24-04-2018, 03:19 PM
#764
Lucifer II - 666
Thread Starter
Found a soare set of rc tyres in my man cave today sonas there softer I tried them on this and also turned wheels around to make track wider, it goes over anything!
Playing with it in my chill room like a big kid today
Playing with it in my chill room like a big kid today
24-04-2018, 06:56 PM
#765
Advanced PassionFord User
Loving all these lego builds 
keep it up cheers.
keep it up cheers.
The following users liked this post:
Minirotty (25-04-2018)
The following users liked this post:
Minirotty (27-04-2018)
27-04-2018, 09:40 AM
#767
Lucifer II - 666
Thread Starter
27-04-2018, 08:07 PM
#768
Advanced PassionFord User
Ye 3D printed. Got to sort out the head as there are some details that dont come out right. Not sure on cost, depends on the size your after.
This one is about 190mm tall. The max size would be about 700mm but i would have to check the build volume. Waiting for some new filament colours and types.
This one is printed out of PLA which is great stuff just needs to be kept out of direct sunlight as it can go brittle. To print it in ABS which is the same as the lego pieces is difficult of large pieces, they tend to warp.
This one is about 190mm tall. The max size would be about 700mm but i would have to check the build volume. Waiting for some new filament colours and types.
This one is printed out of PLA which is great stuff just needs to be kept out of direct sunlight as it can go brittle. To print it in ABS which is the same as the lego pieces is difficult of large pieces, they tend to warp.
28-04-2018, 12:44 AM
#769
Lucifer II - 666
Thread Starter
Same as the one in the photo woyld be what I’d love mate think it’d look great next to my lorry.
The following users liked this post:
Minirotty (08-05-2018)
08-05-2018, 11:33 PM
#772
Lucifer II - 666
Thread Starter
Brilliant tho! Getting better on the printer?
12-05-2018, 05:04 PM
#773
Advanced PassionFord User
just got the new print filaments so setting things up. One bonus is I have Made some new Sapphire side skirt clips the same as the Ford ones. So thats the side skirts not flapping about any more 
Back on the Lego soon
Back on the Lego soon
The following users liked this post:
Minirotty (12-05-2018)
12-05-2018, 07:12 PM
#774
Lucifer II - 666
Thread Starter
Is it expensive to set one up?
13-05-2018, 11:07 AM
#775
Advanced PassionFord User
You can get one for as little as Ł150, but you get what you pay for. As they have developed the printers for home use there are lots of "pain" removing features and as i have just been reading about safety features. Have a look at 3d printer fires 
I did a bit of reading and decided on the Prusa i3 and at the time the mk2S was the current one. But as it was over Ł700 i was reluctant to shell out for it, so i delayed placing an order. This worked out well as a month after the i3 mk3 came out. This is stuff full of idiot proff stuff, but the back order time was unsure (they are now getting better) I ordered in February and waited 7 weeks to get it.
So for under Ł800 you can print out your projects up to 25x21x21cm in size. I have just done an RC jet boat, but this is showing the limits of what and how you print. The main problem is joining the prints. Unless you use ABS plastic which is difficult and has toxic fumes. The bonding process for the parts has to be glue as most of the print filaments will only melt by using toxic solvents.
Anyway i'm building up to printing this a GIANT 3D PRINTED technic LEGO Bulldozer [Kit 856]
I did a bit of reading and decided on the Prusa i3 and at the time the mk2S was the current one. But as it was over Ł700 i was reluctant to shell out for it, so i delayed placing an order. This worked out well as a month after the i3 mk3 came out. This is stuff full of idiot proff stuff, but the back order time was unsure (they are now getting better) I ordered in February and waited 7 weeks to get it.
So for under Ł800 you can print out your projects up to 25x21x21cm in size. I have just done an RC jet boat, but this is showing the limits of what and how you print. The main problem is joining the prints. Unless you use ABS plastic which is difficult and has toxic fumes. The bonding process for the parts has to be glue as most of the print filaments will only melt by using toxic solvents.
Anyway i'm building up to printing this a GIANT 3D PRINTED technic LEGO Bulldozer [Kit 856]
The following users liked this post:
Minirotty (15-05-2018)
The following users liked this post:
Minirotty (15-05-2018)
15-05-2018, 10:31 PM
#777
Lucifer II - 666
Thread Starter
You can get one for as little as Ł150, but you get what you pay for. As they have developed the printers for home use there are lots of "pain" removing features and as i have just been reading about safety features. Have a look at 3d printer fires
I did a bit of reading and decided on the Prusa i3 and at the time the mk2S was the current one. But as it was over Ł700 i was reluctant to shell out for it, so i delayed placing an order. This worked out well as a month after the i3 mk3 came out. This is stuff full of idiot proff stuff, but the back order time was unsure (they are now getting better) I ordered in February and waited 7 weeks to get it.
So for under Ł800 you can print out your projects up to 25x21x21cm in size. I have just done an RC jet boat, but this is showing the limits of what and how you print. The main problem is joining the prints. Unless you use ABS plastic which is difficult and has toxic fumes. The bonding process for the parts has to be glue as most of the print filaments will only melt by using toxic solvents.
Anyway i'm building up to printing this a GIANT 3D PRINTED technic LEGO Bulldozer [Kit 856]
I did a bit of reading and decided on the Prusa i3 and at the time the mk2S was the current one. But as it was over Ł700 i was reluctant to shell out for it, so i delayed placing an order. This worked out well as a month after the i3 mk3 came out. This is stuff full of idiot proff stuff, but the back order time was unsure (they are now getting better) I ordered in February and waited 7 weeks to get it.
So for under Ł800 you can print out your projects up to 25x21x21cm in size. I have just done an RC jet boat, but this is showing the limits of what and how you print. The main problem is joining the prints. Unless you use ABS plastic which is difficult and has toxic fumes. The bonding process for the parts has to be glue as most of the print filaments will only melt by using toxic solvents.
Anyway i'm building up to printing this a GIANT 3D PRINTED technic LEGO Bulldozer [Kit 856]
No way! That is truly epic!!! I want one but thats a lot a money to shell out enit.
16-05-2018, 10:40 PM
#779
Lucifer II - 666
Thread Starter
OMG!!! Thats bloody epic man!
Buy before ya do that don’t forget my figure
I have the Brick show this weekend and have made some info frames to go with my display.
Buy before ya do that don’t forget my figure
I have the Brick show this weekend and have made some info frames to go with my display.
20-05-2018, 08:23 PM
#781
Lucifer II - 666
Thread Starter
Not sure if this will work, but here’s video of my Lego stand at Lego show yesterday
Facebook Post
Last edited by Minirotty; 20-05-2018 at 08:25 PM.
20-05-2018, 08:47 PM
#782
10K+ Poster!!
They look great mate, well done
The following users liked this post:
Minirotty (20-05-2018)
20-05-2018, 10:35 PM
#783
Lucifer II - 666
Thread Starter
21-05-2018, 09:32 AM
#784
Lucifer II - 666
Thread Starter
Few pics of my stand..
30-05-2018, 07:34 PM
#785
Lucifer II - 666
Thread Starter
My Blue Porsche GT3RS went the viral rounds on Facebook again this week because I posted new pics up with blue wheels and was marmite to some....
I love it.
Also upset the applecart again in the brick scene today loo
Got some GT3RS wheels in Gold which are 1:8 and then got some 1:10 tyres and made them look like euro stretch fitment, so will fit them to a 1:10 Conisegg (so) Im currently building...
I love it.
Also upset the applecart again in the brick scene today loo
Got some GT3RS wheels in Gold which are 1:8 and then got some 1:10 tyres and made them look like euro stretch fitment, so will fit them to a 1:10 Conisegg (so) Im currently building...
31-05-2018, 02:14 AM
#787
Lucifer II - 666
Thread Starter
Thanks Richie, was a good experiancd man.
Haha always upsetting um, the new Bugatti Cheyron Lego is out in a couple of days, the fake will soon follow lol
I’ll get that and modify it too lol
Feet killing me this evening so more time in chill room on bricks!
Conigsegg (sp) looking good...
Had to widen the rear chassis by 4 stids and the front by 2 also widened the rear body work by 2 studs and not even built it yet lol
Haha always upsetting um, the new Bugatti Cheyron Lego is out in a couple of days, the fake will soon follow lol
I’ll get that and modify it too lol
Feet killing me this evening so more time in chill room on bricks!
Conigsegg (sp) looking good...
Had to widen the rear chassis by 4 stids and the front by 2 also widened the rear body work by 2 studs and not even built it yet lol
01-06-2018, 10:04 AM
#788
Lucifer II - 666
Thread Starter
Some say I got to much time on my hands haha
But when I grt an idea I have to check it out! So seeing as I now had spare 1:8 Porsche wheels, I thought Id do stretch fit again and do red on red with Ferrari...
One of my first Technic car builds, I think it looks ace!
Also a mate wanted to know how to modify his Beetle Bug for slammed look so I did mine which is only in early stages and took pics for him along the way to show him how to do it... looks sick with camber on rear and narrow front track.
But when I grt an idea I have to check it out! So seeing as I now had spare 1:8 Porsche wheels, I thought Id do stretch fit again and do red on red with Ferrari...
One of my first Technic car builds, I think it looks ace!
Also a mate wanted to know how to modify his Beetle Bug for slammed look so I did mine which is only in early stages and took pics for him along the way to show him how to do it... looks sick with camber on rear and narrow front track.
06-06-2018, 12:30 AM
#790
Lucifer II - 666
Thread Starter
I do mate Inlike winding um up lol
06-06-2018, 10:31 AM
#791
Lucifer II - 666
Thread Starter
Having a bit of a redesign as I think the front of this model realy ruins the look of the whole car, lets it down so what you think?
The following users liked this post:
Minirotty (06-06-2018)
06-06-2018, 10:51 PM
#793
Lucifer II - 666
Thread Starter
The following users liked this post:
Minirotty (07-06-2018)
The following users liked this post:
Minirotty (07-06-2018)
07-06-2018, 11:16 PM
#796
Lucifer II - 666
Thread Starter
The following users liked this post:
andy888 (10-06-2018)
10-06-2018, 05:40 AM
#797
Lucifer II - 666
Thread Starter
16-06-2018, 09:36 PM
#798
Lucifer II - 666
Thread Starter
Just the front left to redesign...
22-06-2018, 04:16 AM
#799
Lucifer II - 666
Thread Starter
1:10 supercar all loaded on 1:10 truck
22-06-2018, 06:40 AM
#800
Loving all the new builds buddy! That supercar one (white Koniegsegg or however you spell it) looks awesome!
How do you do the 'stretch' tire look? Also on the red one, I think stretched fronts with normall rears would look ace!
Any pictures of how to lower and camber the beetle? I may have to buy one after seeing that one!
How do you do the 'stretch' tire look? Also on the red one, I think stretched fronts with normall rears would look ace!
Any pictures of how to lower and camber the beetle? I may have to buy one after seeing that one!
The following users liked this post:
Minirotty (06-12-2018)