When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If popped the covers off and there's a few extra screw holes, looks like a lip has been removed....would this allow the speaker to sit on the cover as opposed to under it??
I replaced the ones in mine with 13cm jvc speakers, all I had to do on the speaker was to nip the mounting tangs a little so they fitted in plastic surround and drill some small holes to mount them to the surround, the bonus I did find was the jvc had a thread going though the middle of the magnet under the label so I could bolt it to the car the same was that the original was, looks nice and factory
I replaced the ones in mine with 13cm jvc speakers, all I had to do on the speaker was to nip the mounting tangs a little so they fitted in plastic surround and drill some small holes to mount them to the surround, the bonus I did find was the jvc had a thread going though the middle of the magnet under the label so I could bolt it to the car the same was that the original was, looks nice and factory
Do you have any idea which were the speakers with the thread through the middle of the magnet? I also want to replace the original ones, but want to fit them in the original way.