I have recently had a replica set of Bbs E50 wheels made in 4 stud by a well known guy for my 3dr race car but have decided I want to go centre locks. These wheels are identical to the genuine items.

The sizes are 17x8 front and 17x8.5 rears and they are still 3 piece as the originals, the wheels currently have 215/40/17 on the front and 235/40/17 tyres on the rear which are not included. The wheels are tight on the arches on my track car and the arches have been heavily rolled so in my opinion if you ran 205 on the front and 215 on the rear they should fit a road car with minor rolling to the arches, the centres are alloy so worse case you could always have the backs machined if you wanted to.

These wheels are rare and are a one off built set, they are brand new and the little marks you can see in the pics are whatever they use on the tyres when they are fitted and will clean off. There is a small blemish on one of the outer lips but very minor and doesn't really notice. Only been fitted once to check clearance. You will need 100mm wheel studs for these which I have at additional cost if required.

I'm looking for £2500 for the wheels (cost £2850) and there is 4 complete wheels and 1 spare centre ( can supply inner and outer parts to make a full 5th wheel at additional cost )

Wheels studs and gpA nuts £150 (cost £250)

No offers and if you want them posted I'm happy to box up for you but you will need to arrange your own courier.

 

Minty mint rich glws

 

I'm not sure I should be selling them mate as I went 4 stud to make it easy on track days but I can't get the centre locks out of my head

 

What's the et of the wheels ? Front and rear?

 

Not 100% sure mate as they are made the same as the group a centres but I will do some measuring tomorrow and let you know.

 

You still have these for sale?

 

Long gone I’m afraid.