Breaking ST170s July 2017
The following users liked this post:
STeve (16-04-2017)
#362
Regular Contributor
You got anything left from the magnum grey 3 door mate?
After a rear bumper.....
and maybe some standard front springs?
After a rear bumper.....
and maybe some standard front springs?
Last edited by Mashurst; 23-04-2017 at 08:14 PM.
#363
#366
Regular Contributor
I would definitely take the bumper off you Mate, just might not be able to get there for a bit. It's going to be a 5 hour round trip for me :-( so I'll have to fit it in somewhere....
#370
Regular Contributor
Arrived at Stuart's early Steve, and picked up seats and bumper. Well pleased Mate, seats are all in now and looking good. Just need to get rid of the originals now before her indoors starts giving me grief
Impressed with the blue one Stuart is sorting, gonna be an awesome motor Maybe one of these days I'll have a crack at something like that myself Could have stayed all day just looking over all the bits
Anyway, thanks very much Mate, take care
Impressed with the blue one Stuart is sorting, gonna be an awesome motor Maybe one of these days I'll have a crack at something like that myself Could have stayed all day just looking over all the bits
Anyway, thanks very much Mate, take care
#372
Regular Contributor
Hi Steve, thanks again for seats, great
Just one slight problem, the air bag light is now on, presumably because the original seats had side airbags which are no longer there?
Do I need to turn the seat air bags off in the software? I have a VCM and IDS for my Transit, which I think will work on the Focus software?
Cheers
Just one slight problem, the air bag light is now on, presumably because the original seats had side airbags which are no longer there?
Do I need to turn the seat air bags off in the software? I have a VCM and IDS for my Transit, which I think will work on the Focus software?
Cheers
#373
Eh up. I'm after a Gear Stick Surround as my front clip broke yesterday and the bladdy thing pops up after every couple of changes!!! If you've got a pre-carbon effect wrapped one i'd snap your arm off as it'll save me a job.
If you have a spare half decent driverside mat i'd have that too, mines nasty!
Cheers,
Allan
If you have a spare half decent driverside mat i'd have that too, mines nasty!
Cheers,
Allan
#374
Moderator
Thread Starter
iTrader: (11)
Eh up. I'm after a Gear Stick Surround as my front clip broke yesterday and the bladdy thing pops up after every couple of changes!!! If you've got a pre-carbon effect wrapped one i'd snap your arm off as it'll save me a job.
If you have a spare half decent driverside mat i'd have that too, mines nasty!
Cheers,
Allan
If you have a spare half decent driverside mat i'd have that too, mines nasty!
Cheers,
Allan
#391
Moderator
Thread Starter
iTrader: (11)
July 1st 2017
Currently breaking 3 x 170s ,all parts available
3 DOOR IN IMPERIAL BLUE
5 DOOR HIGH SPEC IN IMPERIAL BLUE
5 DOOR IN PANTHER BLACK
Currently breaking 3 x 170s ,all parts available
3 DOOR IN IMPERIAL BLUE
5 DOOR HIGH SPEC IN IMPERIAL BLUE
5 DOOR IN PANTHER BLACK
Last edited by STeve; 01-07-2017 at 07:24 PM.
#393
Regular Contributor
Could be in the market for a rolling shell with a v5 in a couple of months Steve, do you ever sell any of the ones you break? Might want an engine/ecu to go with it, but nothing much else
#394
Moderator
Thread Starter
iTrader: (11)
have one here at moment ideal for you a 54 plate 5dr in imp blue thats rust free or Im bound to have another further down the line, things like bumpers and doors sell quick mind
The following users liked this post:
Mashurst (14-07-2017)
#395
Regular Contributor
thanks for the quick reply Steve, I love that colour but I'm afraid it's too early for me as I have 2 projects I need to finish and move on before I can get another one past her indoors
I was testing the water, so now I know you'll do it, I'll come back to you when the coast is clear
I was testing the water, so now I know you'll do it, I'll come back to you when the coast is clear
The following users liked this post:
STeve (13-07-2017)
#396
Moderator
Thread Starter
iTrader: (11)
thanks for the quick reply Steve, I love that colour but I'm afraid it's too early for me as I have 2 projects I need to finish and move on before I can get another one past her indoors
I was testing the water, so now I know you'll do it, I'll come back to you when the coast is clear
I was testing the water, so now I know you'll do it, I'll come back to you when the coast is clear
The following users liked this post:
Mashurst (14-07-2017)
#397
Moderator
Thread Starter
iTrader: (11)
FRESH IN, super well speced 170 in Magnum Grey
ALL prices are based on collection, ALL panels are collection only from Watford
Recaro interior Ł400 prov sold
TTV full solid clutch upgrade as new Ł350
Vibra technics full set of 3 engine mounts Ł200
Injectors
Samco intake elbow Ł35
OMP steering wheel with Boss Ł100
Bike throttle bodys Ł100
Kmac adj top mounts Ł140
xenon headlights Ł100
Green silicon Hoses SOLD
5 spoke alloys in great condition with great tyres Ł300
drilled grooved near new discs & pads Ł100
stainless steel under bonnet bling POA prov sold
FK Coilovers new new Ł120
low miles engine with recent belts and sump Ł280 + Ł80 for delivery if required
Miltek full exhaust system Ł200
stainless manifold with decat & flexi Ł150
k&n ind kit Ł30
OMP steering wheel with boss Ł80
IMRC Ł90
Polybushed refurbed rear subframe Ł250
LED rear light clusters Ł75
sub + amp Ł120
quick shift adj gearlever Ł100
ALL prices are based on collection, ALL panels are collection only from Watford
Recaro interior Ł400 prov sold
TTV full solid clutch upgrade as new Ł350
Vibra technics full set of 3 engine mounts Ł200
Injectors
Samco intake elbow Ł35
OMP steering wheel with Boss Ł100
Bike throttle bodys Ł100
Kmac adj top mounts Ł140
xenon headlights Ł100
Green silicon Hoses SOLD
5 spoke alloys in great condition with great tyres Ł300
drilled grooved near new discs & pads Ł100
stainless steel under bonnet bling POA prov sold
FK Coilovers new new Ł120
low miles engine with recent belts and sump Ł280 + Ł80 for delivery if required
Miltek full exhaust system Ł200
stainless manifold with decat & flexi Ł150
k&n ind kit Ł30
OMP steering wheel with boss Ł80
IMRC Ł90
Polybushed refurbed rear subframe Ł250
LED rear light clusters Ł75
sub + amp Ł120
quick shift adj gearlever Ł100
Last edited by STeve; 27-07-2017 at 08:38 AM.
#400
I'll be after a full exhaust system from the Manifold back and a pair of driveshafts for my poorly 5 door very soon (pay day!). I'll need them delivered too sadly, bit far to drive.