Digital display units (ultra gauge)
#1
I'm Finding My Feet Here Now
Thread Starter
Digital display units (ultra gauge)
Okay, so this will be a hard one for you all.
The ultra gauge runs off a OBD port. However my cars pre 1996 and does not run a OBD port. However I want something that will allow to to display multiple readings for things like oil temp, water temp, intake temp, and so on. Trouble is I don't want lots of gauges, want to try retain the standard dash setup.
How else can I do this without the OBD meter onto something like a ultra gauge / scan gauge
The ultra gauge runs off a OBD port. However my cars pre 1996 and does not run a OBD port. However I want something that will allow to to display multiple readings for things like oil temp, water temp, intake temp, and so on. Trouble is I don't want lots of gauges, want to try retain the standard dash setup.
How else can I do this without the OBD meter onto something like a ultra gauge / scan gauge
#2
You'd need to be fitting multiple sensors to the engine to allow any dash to display the info.
Most race type dash units can be used in that manner. PLX Devices offer some gauges that will do the same too, although each sensor requries it's own control box...which is a bit messy but their display units are nice.
Most race type dash units can be used in that manner. PLX Devices offer some gauges that will do the same too, although each sensor requries it's own control box...which is a bit messy but their display units are nice.
#3
10K+ Poster!!
I used the Tft toucan, it is excellent but that takes info from my vipec ecu which is aftermarket.
Last edited by Caddyshack; 16-08-2016 at 04:44 PM.
The following users liked this post:
Caddyshack (16-08-2016)
#5
PassionFord Post Troll
iTrader: (1)
Okay, so this will be a hard one for you all.
The ultra gauge runs off a OBD port. However my cars pre 1996 and does not run a OBD port. However I want something that will allow to to display multiple readings for things like oil temp, water temp, intake temp, and so on. Trouble is I don't want lots of gauges, want to try retain the standard dash setup.
How else can I do this without the OBD meter onto something like a ultra gauge / scan gauge
The ultra gauge runs off a OBD port. However my cars pre 1996 and does not run a OBD port. However I want something that will allow to to display multiple readings for things like oil temp, water temp, intake temp, and so on. Trouble is I don't want lots of gauges, want to try retain the standard dash setup.
How else can I do this without the OBD meter onto something like a ultra gauge / scan gauge
£700 Andrew 07746431886
#7
10K+ Poster!!
I have the stack on mine, easy to fit and they work and look great IMO
Thread
Thread Starter
Forum
Replies
Last Post
shanek2041
Fiesta RS1800/RS Turbo
3
06-03-2021 07:06 PM
Fudgey
General Car Related Discussion.
18
24-05-2016 08:42 PM
timsrs
Ford Sierra/Sapphire/RS500 Cosworth
11
21-05-2016 04:48 PM