Second hand flywheel sourced and new ap clutch and ford cover as old flywheel was only grinded last year not sure if it was slightly out of balance but didn't notice it when driving and new clutch was already slipping.

https://cimg4.ibsrv.net/gimg/passion...2aee6f08de.jpg
https://cimg5.ibsrv.net/gimg/passion...0ef7169f00.jpg
https://cimg6.ibsrv.net/gimg/passion...3ef6102415.jpg
https://cimg3.ibsrv.net/gimg/passion...3d07fb7ccd.jpg


Didn't like the actuator in anodize so I stripped it and put it in some oven cleaner then polished it came out quite well.

https://cimg1.ibsrv.net/gimg/passion...bad53490d5.jpghttps://cimg2.ibsrv.net/gimg/passion...423760ddab.jpghttps://cimg4.ibsrv.net/gimg/passion...39b63be9c7.jpghttps://cimg0.ibsrv.net/gimg/passion...009ea41cde.jpg

Looking good mate. I’m the same I clean or paint as I go but if it was totally spotless I wouldn’t want to drive it. A lot of people judge mine by minters at shows they see and they always say it could do with a good clean up or why haven’t you painted anything and I say because I want time to drive it not clean it.

Head back from Graham Goodes after a slight skim, new valve guides and valve faces recut etc.

https://cimg6.ibsrv.net/gimg/passion...a0acba9e8e.jpghttps://cimg7.ibsrv.net/gimg/passion...b2d7f4b482.jpghttps://cimg5.ibsrv.net/gimg/passion...249da3217d.jpg
New followers
https://cimg8.ibsrv.net/gimg/passion...01dacacf29.jpghttps://cimg9.ibsrv.net/gimg/passion...c1b3299527.jpg

Slowly going back together now all new Roose silicon hoses in unbranded OE black. Turbo rebuild by Turbo Performance, all new exhaust studs and nuts, new slimline fans as old ones were very noisy, took hem apart to see bearings then thought better to replace with new.

https://cimg8.ibsrv.net/gimg/passion...f0ca424852.jpghttps://cimg9.ibsrv.net/gimg/passion...6200b4eebf.jpghttps://cimg7.ibsrv.net/gimg/passion...9bfb5d0905.jpghttps://cimg0.ibsrv.net/gimg/passion...077ebeca74.jpghttps://cimg1.ibsrv.net/gimg/passion...41df7448fd.jpghttps://cimg2.ibsrv.net/gimg/passion...d3e10cca6b.jpghttps://cimg5.ibsrv.net/gimg/passion...cb59c4c709.jpghttps://cimg3.ibsrv.net/gimg/passion...9e1d2afc61.jpghttps://cimg4.ibsrv.net/gimg/passion...b71abb741a.jpghttps://cimg3.ibsrv.net/gimg/passion...54d9e3b4fd.jpghttps://cimg4.ibsrv.net/gimg/passion...4ce1faa76e.jpghttps://cimg6.ibsrv.net/gimg/passion...26b191cda4.jpghttps://cimg8.ibsrv.net/gimg/passion...65ba8e410f.jpghttps://cimg9.ibsrv.net/gimg/passion...902773099c.jpghttps://cimg0.ibsrv.net/gimg/passion...535b2e7f48.jpghttps://cimg1.ibsrv.net/gimg/passion...818f9cd87b.jpghttps://cimg6.ibsrv.net/gimg/passion...7f96adddf1.jpg

Looking good mate, you taken her out for test drive yet?

Good work

She has done about 3000 miles so far in two years, just wanted to freshen it up a bit.