Zetec turbo
Guys in getting a 2.0 Zetec built for more boost, aiming for about 400ish bhp plus nitrous, what gearboxes and axles are you all using for this sort of power? Guessing I may have to go T5 with an atlas or 9"
|
I'm using a T5 gearbox and Volvo rear axle. An Atlas will do but it needs heavily (and costly) uprating or an 8-inch Ford axle is sutiable but they are getting very rare and the ratios aren't usually ideal for a four-cylinder turbo. A 9-inch is a bit overkill. You will need a dry sump at that kind of power by the way.
|
Yes mate I'm looking at a dry sump! I just contacted quaife but they want 7k for a gearbox to take that power ha
|
Originally Posted by Semperboy
(Post 6446516)
Yes mate I'm looking at a dry sump! I just contacted quaife but they want 7k for a gearbox to take that power ha
my capri just runs a standard mt75 and 2.8 atlas and limo and 215/45/15 toyo proxies with about 290 bhp haven't broke anything yet :DD: Why do zetec's need dry sumping above 400bhp thought it was revs that killed the oil pumps ?? |
No, nothing to do with revs, there have been plenty of 8000+rpm NA cars with no oil pump failures I'm told from Dunnell, the Zetec specialist.
Generally, much above 400bhp and they are a ticking time bomb seems to be the opinion. |
It's going in my ford Anglia, I'm already running a supercharged 1800 Zetec but just need more power, I've heard it's a combo between revs and the extra force the boost is putting down on the crank?
|
All times are GMT. The time now is 04:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands