Neil's Mercury grey sapphire Cosworth (New pics Updated 18th may)
#43
hi mate loved looking at ya thread awesome car i did same with my cossie spent loads on it then laid it up for almost a decade never did it cross my mind to sell but everybody nagged me to sell but i didnt still got it and just put it back on road now when i was ready now enjoying car again so enjoy it when you put her back on road
#47
Yeah just kept hold of it hopefully i can get it out this year sometime just collected some bits for her over the years ,ive been clearing out my garage having a sort out paint up so i can do some work on her ,got another garage going up later this year but have to do it in the single one at mo ,
Been collecting some bailey stuff i know they are popular but got some for a good price...
Been collecting some bailey stuff i know they are popular but got some for a good price...
#54
Started to strip away the pipes, rad ,intercooler pipes ,loom etc today only got a few hrs on her but thinking about whipping the engine out to clean it up its not that dirty but gotta do a cam belt w/pump the rack and crossmember is a little tatty ? it needs a fan loom putting in so it would be easier well i dont know what to do how far am i going to go do i go and powder coat some of the the fr suspension got a bush kit to do replate the steel bit or just clean it satin blk from a tin DECISIONS
COUPLE OF PICS FROM TODAY
Pace rad to go on got to be better than std
COUPLE OF PICS FROM TODAY
Pace rad to go on got to be better than std
Last edited by nuttynil; 28-02-2011 at 11:52 PM.
#61
Small update I've been pulling bits off the cossie first I've flogged the wheels.I have started to strip the Radner cooler out ,cam belt water pump verniers was going to just to put new water pump cam belt clean up the bay a bit and put the Bailey tanks in but I might just take the engine out give the bay a paint and tidy gotta do a new fan loom and the fr suspension needs a repaint or powder coat .was also thinking about a hydraulic clutch kit because I'm using a paddle clutch and it reallynis like an on off switch ??? It's really how much further I wanna go really .and the h/gasket been on there for years do I change it or is it the old saying if it ain't broke don't fix it ???? What do you think any advice for me .Neil
#63
Engines ready to come out just got the fuel pipe connector to do ,been having a clear up of garage because it's only a single one and being 6,2 18 stone I need room .Should post some pics up tomorrow ,got a cheap set of wheels maybe get her rolling again .Neil
#65
Tomorrow i will get the clutch and flywheel off so i can mount her on my engine stand ,then i can start listing what gaskets i will need .
Took afew pics but alot have got lines thru them think its a corrupted sd card but some are ok
SOme more
Im working out of single garage just about enough room for you to get up the side just about got all my tools in there but as you can see compact..........
Got some work to do in the bay fresh lick of paint rewire fans and also seen the alternator lead has got a bit hot ,might put a hydraulic clutch as im running a paddle clutch ,the clutch is like an on off switch ....
Took afew pics but alot have got lines thru them think its a corrupted sd card but some are ok
SOme more
Im working out of single garage just about enough room for you to get up the side just about got all my tools in there but as you can see compact..........
Got some work to do in the bay fresh lick of paint rewire fans and also seen the alternator lead has got a bit hot ,might put a hydraulic clutch as im running a paddle clutch ,the clutch is like an on off switch ....
#66
Been looking at parts on the eBay and web .First on my list is gaskets for the rebuild the head gasket that is on there is a grip a one but the block has been wire ringed .Can anyone recommend a head gasket type to use and need good quality gasket kit .cheers Neil
#67
Hi been busy in the garage tonight managed to get the clutch and flywheel off .Mount it on the engine stand .lots of parts to sort out got get a full gasket set etc,just dont know where to start.Thinking of sorting the engine out first here some pics.
Last edited by nuttynil; 02-05-2012 at 12:05 AM.
#70
Might have a bit of time on the engine today .the next job is to drop the oil out take off the sump check the oil pump and bearings.i have an old parts washer round the back of the house think I better get this up and running ,don't know where I'm going to put slowly running out of space. Neil
#76
Back to the engine got the sump off now and it looks very clean in there .The engine was built in 94 by bluesprint in maldon essex and has only done around 2000 miles if that but rather than just spruce it up a bit and then have to do the head gasket or something .