|
pretty Cool S2? ;-)
After months of sitting about I finally decided to get my RST pulled out brushed down and turned out.
For those of you that dont know the spec its Engine:- 2.0 Blacktop Zetec Pauter Steel Conrods(600bhp capable) AVA spec'd(7.1:1) JE Forged Racing Pistons(again spec'd to do big BHP). Gated/modified sump. AVA built the engine with lightened and ballanced crank etc etc. Ported head to maximise the efficiency of the TB's & exhaust manifold Its running large independant throttle bodies(bike TB's) for sharper throttle response. AVA custom inlet manifold which allows the TB's to be fed nice cool air from the........... Genuine Bher RS 500 intercooler AVA custom exhaust manifold (equal lengthed with longer headers) Full customised mongoose/AVA exhaust with flexi section 3" from turbo back. AVA spec'd T34/63(stage 3) Omex 600 with custom AVA loom & greens for now. Suspension Leda fully heightdamping adjustable Coilovers. Rsi front crosmember & fully adjustable lower front arms/TCA's MEF compresson struts & trailing arms. Brakes Front 355mm disks with custom bells and Brembo Evo Calipers Rear 308mm vented disks with custom bells and Brembo Evo Calipers Wheels Compomotive Mo' 8 x 17 Et 40 more spec later, thats enough for now, I'll start getting pics up:grin: |
|
:wow: iwant 1 :top:
|
youve had this a few years now havent you, what sort of power has she got andy?
|
Still looks awesome Andy :top:
|
:king:
|
Aye I've had it what? 6/7 years now! I tend to go through phases of enjoying it then hating it - a good clean doesnt do it any harm.
I've destroyed a few uprated gearboxes which is a bit of a drain, its currently got a CTS stage 2+ in it atm however the casing where the clutch cable passes through is burst. It needs either taken out again(which is a pest because of how tight it is under the bonnet) else a bracket fabricated to allow the cable to operate the clutch mechanism propperly. Power wise, its on a base map just now - the engine having been ran in, power isnt worth measuring until its been fully mapped. 300atw is the aim for now with a good spread of power which the TB's/Inlet & Exhaust manifold should see to. Out and out power is all well and good but drivability and fun are more important to me. |
that is one expensive ornament andy:blabla:we need to see this out and about more:grin:engine bay looks spot on:top:
|
Awesome car, Proper Spec! :king:
|
|
|
Originally Posted by smila
(Post 4105909)
:wow: iwant 1 :top:
Originally Posted by T28 RST
(Post 4105919)
Still looks awesome Andy :top:
Originally Posted by stevenebm
(Post 4105949)
that is one expensive ornament andy:blabla:we need to see this out and about more:grin:engine bay looks spot on:top:
Originally Posted by Munch
(Post 4105984)
Awesome car, Proper Spec! :king:
|
:top:Love the s1 kit
|
stunning that mate!
|
very nice mate!
|
Love the s1 kit on it, very nice
|
stunning car i wont mine 2 end up with that power really nice car get it fixed and on a track
|
looks gd mate
|
Love it Andy and I'm glad you've got the enthusiasm back for it. Now give me your Evo!
|
so whats needed to get it running again!?
|
Very cool car. What bike are the bodies off?
|
:top::top::top:
Brian |
Originally Posted by Stoo
(Post 4107248)
Love it Andy and I'm glad you've got the enthusiasm back for it. Now give me your COCK
so andy whats the plans for the car then?anything new in the pipeline? |
any interior pics? has it been in a magazine??
|
Always loved your series 2 Andy, what happened to the front bumper?
Mike |
Glad you've not given up on it Andy. Get an MTX75 in it and have some fun! :top:
|
looks awesome mate
|
Good news you have decided to get back on with it Andy , im sure the clutch cable will be an easy enough fix.
|
|
|
very very nice
|
Love it :clap:
|
Those rods don't look up to much...
Lol ;) Looks a proper thing mate - be good to see what it makes mapped :D |
Cool car Andy. Remember you telling me bits about the spec over the years, didn't realise it was such a complete / well chosen list of mods :top:
So much potential once it's mapped and running just right. Get that enthusiasm back in there, and get it out on the road this summer! |
600bhp is pretty lame these days aint it Will:cry:
Ok the cars reached the end of its life as one car, i'll be breaking it over the coming weeks - all parts available. Although I haven't sat down and worked out prices for stuff yet i'm happy to recieve sensible offers on parts prior to advertising (by pm) |
Shame this is getting broke Andy like l said, but atleast you have the Evo to play with :king:
Mike |
Originally Posted by MikeR
(Post 4107524)
what happened to the front bumper?
Mike erm :cry: i have the PERFECT picture for this thread ;) who said saxo's were shite?! ;-):cry::cry: |
i'll give a 1k for it.
what ya gotta do is. talk to me :cry: |
WOW:shocked:
I like that very much Andy. |
| All times are GMT. The time now is 02:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands