My Mk1 Golf project
 

I thought it was about time i started this thread as a few people have bee asking me t start 1 on the progress so here goes.

I'm in the process of building a mk1 golf 20v turbo.

The spec will be as follows

1.8 20vt motor with H section rods and proper pistons, gt30 turbo(still undecided) external wastgate, mk3 16v box with sequential shifter. Autronic managment

Is still in the stages of being stripped ready for preping and welding before it goes in for a proper weld in cage. I've alreadt aquired a a 0vt motor, mk3 16v box, manifold with garrett flange, 15" bbs plit rims, and my cobra evolution s seat. My next urchase will be the sequental shifter hopefully and possibly some th mono's in track black as my function over fashion wheels.

The aim of the car is to be as ligh as possible at around 800kg fully stripped out and have a motor producing 400bhp. In reality it will probably end up being about 350bhp which will still be plenty.

I'll try get some pics tomorrow and start the thread properly :D

:top: :top: :top: :top:

deffo get pics up

Its nothing to look at at the mo but i suppose people would get the idea of what i'm aiming for all sound deadning is removed ready for welding, spare wheel well is getting removed, i eve got rid of the roof lining as it weighs a tonne lol :D

I'll get pics up of me bts i've required like me seat and me 15x8 bbs splities :cool:

Nice one fella. I was thinking of doing a mk1 with a 20VT lump in it. Just couldnt be arsed with the hassle!

Keep up the good work!

sounds cool, as said get some pics up :top:

Sounds an awesome project :top:

always loved the mk1 golfs . .especially 1s wi 20vt motor,tuning company along road from me got 1 wi 410bhp ma m8 was telling me!!! :top: :top:

:top: :top: :top:

sounds like its going to be a good one-
as many pics as possible please :DD:

Sounds like an interesting build you have planned bud, i like golfs :top:

I managed to get a few pics today of a few bit i have in the house, to wet to go out and get pics of the other bits in the garage.

Here goes

This is my sqs seqshift unit which allows gear changes in a forward and bacwards motion ie sequential lol

https://img.photobucket.com/albums/v...Picture001.jpg

https://img.photobucket.com/albums/v...Picture002.jpg

https://img.photobucket.com/albums/v...Picture003.jpg

My small skiny front mount lol

https://img.photobucket.com/albums/v...Picture004.jpg

https://img.photobucket.com/albums/v...Picture005.jpg

My cobra evolution seat and trs 3" harness

https://img.photobucket.com/albums/v...Picture006.jpg

https://img.photobucket.com/albums/v...Picture007.jpg

More pics will follow over the weekend of my bbs split rims and possibly some of the shell :D

i like..sounds its gonna be mad :clap: :clap:

Just a small update and some more pics for those that are interested

https://img.photobucket.com/albums/v...f/DSC00653.jpg

https://img.photobucket.com/albums/v...f/DSC00654.jpg

https://img.photobucket.com/albums/v...f/DSC00655.jpg

https://img.photobucket.com/albums/v...f/DSC00656.jpg

https://img.photobucket.com/albums/v...f/DSC00657.jpg

:top: :top: :top:

gonna look wicked when done...

Rear 10" wide with 3.5" lip

https://img.photobucket.com/albums/v...f/DSC00658.jpg

Front 9" with 2.5" lip

https://img.photobucket.com/albums/v...f/DSC00659.jpg

BBS RM'S i used to have a set on a mk2 years ago they look :cool:

Bloody nice project :cool:

Always wanted a mk1 and will get round to getting one.
Out of interest how are you managing to sort a sequential shifter on a i presume standard mk3 box? What kind of change do they have on them as standard?

Keep up the updates :top:

XRT_si

They work on cable change, so its just a clever mechanism that pulls the cables. Its all done in the sqs shifter unit that replaces the standard one basically instead of a standard arrangement it is like a motobike but where 1st is on a bike reverse is lol.

The will look awesome once finished -interior looks like a right headache at the moment :cry:

Will those wheels fit on?!! :eek:

Alps, youre the fucking man ;)

Keep the updates rollin fella :)

AGAR-COSWORTH

The interior is looking better now all the looms out and most the suface rust was ground out and rust treated.

The garage is getting tidied out tomrrow so will have the in there soon so can get the windows out and the doors and wings off and realy get into it :cool:

Another update with a purchase of stevenbm's gt30 turbo :cool:

https://img.photobucket.com/albums/v...turbo002-2.jpg

thats a big bad boy turbo,my m8 got a ibeza cupra (52 plate and 350bhp)and that got the gt28 turbo,gonna b an awesome spec then m8??? :top: :top:

:top:

Small update, i've finally got the car in the garage and skiped the front wings and bonnet so hopefully the progres will start properly now.

I'm hoping to get the the rest of the seam sealer off and start to remove all the underseal from the inner wings and get the doors off so i can get the welding done :top:

Those wheels are WIDE, what arches will you run to warrant running those wheels?

well done alps mate ,

glad to see ur getting stuck into a new project after the s1 went to heaven lol



got a mate ove in liverpool whos well into these and done a few 20 vt conversions in mk 1 and 2s ,


might come in handy for info later on in the build mate ??

well done fella
:clap: :clap:

datar18

Standard the wheels might be going as i dont think the brakes i want will go under them, i hope they do go on as they look :cool:

As far as I know, the widest you can get on a mk1 without silly arch work is a 7.5 maybe an 8 if you push your luck.

But good luck to you dude


Oh yeah, PS, What would you want for them if you sold them?

mk1 golfs are the only golf i would have & yours looks like its going to be a weapon :top: :top:

Small update again, Moza came round today and proceeded in removing the front panel, back panel, spare wheels well and a few other problem areas. Anywy all went to plan and its starting to finally take shape or at least it will tomorrow when the new panels go on.

https://img.photobucket.com/albums/v...f/DSC00668.jpg

https://img.photobucket.com/albums/v...f/DSC00669.jpg

https://img.photobucket.com/albums/v...f/DSC00670.jpg

https://img.photobucket.com/albums/v...f/DSC00671.jpg

https://img.photobucket.com/albums/v...f/DSC00672.jpg

https://img.photobucket.com/albums/v...f/DSC00673.jpg

Where did you get the car from? My mate has recently sold a 1 owner gti in black via ebay.

Use to luv all vee dubs till i got my escos. My first car was a mk3 vr6 and loads of my mates still have golf and slag me for havin a ford :cry: :cry:. The car should be awsome when its done. keep up the good work mate :top:

can you get the sequential gear things for a ford if so where from ;)

smitsturbo

Not sure tbh mate just tried there web site www.sqsracing.com and they dont list 1, think there just designed for cable change boxes.

BRIGSPORT

I got it from Wigan end of last summer from a bloke called Damen. Not your mates if thats what you were wondering as its had a few more owners than 1 lol

Yeah,just wondering thats all.
Good luck with it. :top:

:top: :top: :top: :top: :top: :top: :banana: :banana: :cool: :cool:

1 day i wil get me a mk1 golf love the look of them
:top: :top: :top: :top:

Where's the panelled up pics :cry2:

aint been taken yet cause i'm a lazy cunt :top: