Group buy - Airtec inlet
As most of you know Motorsport-Developments have just started stocking all Airtec range and there is a possible chance on a group buy...
Haven't got any figures yet, Just seeing if there is any interest?:poke: We will need a minium of 5 people but obviously more people = Cheaper! Cheers Danny |
Nooooooooooooooooooooooooooooo :cry:
Steve |
Haha Sorry Steve. Was the Hart inlet much more??
|
Originally Posted by rsdan123
(Post 5763187)
Haha Sorry Steve. Was the Hart inlet much more??
Steve |
inlet
I'd be interested in the inlet if the prices is right:top:
cheers Shaun |
Sweet! what would you consider to be the right price, They retail around £400 with all the fittings
|
Originally Posted by rsdan123
(Post 5763295)
Sweet! what would you consider to be the right price, They retail around £400 with all the fittings
Steve |
Originally Posted by Moonstone Steve
(Post 5763306)
It would have to be better than the 10% offer imo.
Steve |
i'd be interested
|
Yeah ok ;-)
|
Depending on final price I may be interested.
|
Im deffo interested
|
Ok well get as many as you can and I will set something up tomorrow in the group buy section. I'll see what discount we can do for 5 and 10s
|
Do these inlets give the same or as good as results as the hart ones? What kind of testing have they had?
|
Originally Posted by rsdan123
(Post 5763187)
Haha Sorry Steve. Was the Hart inlet much more??
|
There Identical i have seen both and apart from logo there spot on inside and out. so performance will be identical
|
Originally Posted by miller3
(Post 5763772)
Hart inlet with throttle bracket was 550 quid
Steve |
Maybe i didnt ;-)
Buy i did cry |
But i did
|
Originally Posted by miller3
(Post 5763844)
Maybe i didnt ;-)
Buy i did cry I then found out somebody else got it a lot cheaper than me as well :fume: :wall: :wall: Steve |
So what did you pay mate?
|
Originally Posted by miller3
(Post 5763864)
So what did you pay mate?
Steve |
Originally Posted by TommyB
(Post 5763571)
Depending on final price I may be interested.
Get 10 orders in would we be knocking on £300 each? |
Well we're pushing on a possible 7 ATM ;-)
|
inlet
Put me down for one ! Thanks
|
Can somebody tell me, will it fit in a 4x4 LHD Cosworth??
|
are these straight bolt on or do they need fooking about with
|
Originally Posted by R4N S S
(Post 5764251)
are these straight bolt on or do they need fooking about with
Steve |
Originally Posted by cossie4i_
(Post 5764257)
As its the same as the Hart you will have to fook about :wall:
Steve |
Sorry if this is blatantly obvious or pointed out elsewhere recently (I havent been on here much in the last few months) but what benefit would this have over a STD inlet if i have a standard head, probably bugger all?
|
Originally Posted by BRAMMER
(Post 5764269)
Most are running standard tb so they will fit easier than yours - the only real messing is when you run st escos trumpet section on a 3dr or sapp but again if std then its fine, the only thing is people you are going to need you engine map tweeked it isn't a bolt on and go part
Whats different about the ST trumpet section, just for info? |
ST trumpets are longer i think.
Think i will stick with my modded 2wd inlet for the time being |
Originally Posted by kjc300
(Post 5764274)
Whats different about the ST trumpet section, just for info?
Steve |
Originally Posted by R4N S S
(Post 5764298)
ST trumpets are longer i think.
Think i will stick with my modded 2wd inlet for the time being Steve |
Originally Posted by R4N S S
(Post 5764298)
ST trumpets are longer i think.
Think i will stick with my modded 2wd inlet for the time being |
Ive started a thread in the group buy section for you, please try and add your name there if you are interested so i can get an idea of numbers.
https://passionford.com/forum/trader...ml#post5764644 |
Originally Posted by BRAMMER
(Post 5764546)
I think this would benefit yours though as yours will be in that power range
The map is relatively easy to tweak as its on omex so will get the laptop out lol |
Originally Posted by James @ M Developments.
(Post 5764646)
Ive started a thread in the group buy section for you, please try and add your name there if you are interested so i can get an idea of numbers.
https://passionford.com/forum/trader...ml#post5764644 We now have 7 interested, Anymore so we can make the 10? |
Airtec Will let us have 3, and the rest will go in a few weeks, so first come first serve on those 3
We need 3 more people to get the magic 10. If we do not have 10 by midnight tonight, i will sort the 15% deal out to get these ordered. I will set up a discount code for you, so you can go into the shop and buy the goods at the discount rate and pay, then we can get them shipped out. Don't forget to pick the fitting options if you want the fitting kits. |
Upski!
The group buy is ready to go if people want to log in and pay! |
All times are GMT. The time now is 02:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands