PassionFord - Ford Focus, Escort & RS Forum Discussion

PassionFord - Ford Focus, Escort & RS Forum Discussion (https://passionford.com/forum/index.php)
-   Ford Sierra/Sapphire/RS500 Cosworth (https://passionford.com/forum/ford-sierra-sapphire-rs500-cosworth-16/)
-   -   alloy steering rack bushes are 2wd diff to 4wd? (https://passionford.com/forum/ford-sierra-sapphire-rs500-cosworth/454203-alloy-steering-rack-bushes-are-2wd-diff-to-4wd.html)

james kiely 29-05-2013 08:41 AM

alloy steering rack bushes are 2wd diff to 4wd?
 
i bought a new set of alloy steering rack bushes off a mate of mine that had got them for his 4wd saff .i now want o use these in my 2wd saff and they seem a half inch longer ,i take it as the crossmembers are different the bushes must be different .can i just take the hacksaw and cut these bushes down by the required amount to use in my 2wd setup

advice appreciated:grin:

Glenn_ 29-05-2013 08:49 AM

I thought they were all the same tbh.I fitted a set to mine.

http://www.ebay.co.uk/itm/Ford-Coswo...item3372601ff0

according to this there all the same.Mine were a bit tight to get back in the cross member.

james kiely 29-05-2013 09:00 AM

glenn mine are definatley longer ,they fit fine width wise :roll:

dojj 29-05-2013 09:14 AM

they should fit, the alloy crossmember can get a little bent when you tighten up the bolts so remove the rack and see if they slot in before fitting them to the rack itself

if you can massage the rack a bit to get them to fit it should be ok

you could also try and file them down a bit if they are only a mm out or the like?

rog 29-05-2013 09:26 AM

Not sure about the sizes, but personally I wouldn't cut them, if they end up being too small you'll have play in the rack and defeat the purpose of using them.
I have a set lying in the garage that I've never fitted, they were supplied by the company that Glenn posted the eBay link for.

Glenn_ 29-05-2013 09:55 AM

Do what Dojj said put the metal bush together and see if it will slide in.

james kiely 29-05-2013 10:11 AM

quote=dojj;6256968]they should fit, the alloy crossmember can get a little bent when you tighten up the bolts so remove the rack and see if they slot in before fitting them to the rack itself

if you can massage the rack a bit to get them to fit it should be ok

you could also try and file them down a bit if they are only a mm out or the like?[/quote]

its for a 2wd crossmemeber dojj,and when you put the bushes in they are about 20mm too long





Originally Posted by rog (Post 6256980)
Not sure about the sizes, but personally I wouldn't cut them, if they end up being too small you'll have play in the rack and defeat the purpose of using them.
I have a set lying in the garage that I've never fitted, they were supplied by the company that Glenn posted the eBay link for.

ok rog ,i wont cut them down just in case .

i could get them lathed down i suppose ,it just has me puzzled :cry:

Glenn_ 29-05-2013 06:30 PM

Its a weird one,When you press the standard rubber ones out are they shorter than the metal bushes.

dojj 29-05-2013 07:26 PM


Originally Posted by james kiely (Post 6257014)
its for a 2wd crossmemeber dojj,and when you put the bushes in they are about 20mm too long

any pics?

that's a BIG difference


All times are GMT. The time now is 08:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands