My 3dr Breaking - updated 1/12/08
Welcome to the rsnissan auto jumble :cry: i will update this thread with new bits as i break the car further.
Standard Coil £10 Grp A leads only a few K's use £70 Standard Beru leads £40 Dizzy + phase sensor £20 Turbo Oil Feed pipe including adaptor £20 valve Stem oil Seals £40 Tappets Genune INA £40 PAS pump + Brackets £40 Polished stat housing and stat with take off for water temp gauge £30 Stainless lifting eyes £20 Water pump £30 TPS PFR8 £30 Mint Crank sensor £15 pics available on request for the above bits FULLY aeroquiped breather £250 with welded on - 12 fittings going to both sides of the block with the correct adaptors to screw into the block on the exhaust side and push fitting to fit ion the inlet side and replace the kidney flame trap Also a vent to atmosphere and a -10 return to sump (again proper threaded fitting) http://img.photobucket.com/albums/v1...8/DSCF0737.jpg Powder coated in a hard wearing "eggshell" finish black 3dr Header tank and swirl pot £150 With aeroquiped -4 for the swirl pot, a -4 blank (can be removed for water feed to turbo) and including a mint (rare) 3dr water level sensor also comes with roose motorsport hoses from rad to Stat housing and from the rad to swirl pot comes with brand new black cap, finsihed in black again eggshell finish http://img.photobucket.com/albums/v1...8/DSCF0738.jpg Washer bottle £75 With cap, level sensor (rare) and pump finished in black eggshell finish http://img.photobucket.com/albums/v1...8/DSCF0739.jpg PAS Tank £75 comes with new cap and finished in black eggshell finish powercoat http://img.photobucket.com/albums/v1...8/DSCF0740.jpg 324mm Big brake conversion £500 Using 911 C2/Boxter S calipers been, Freshly refurbed and in porker boxes with brembo blanking plugs. Brand new porker OE pads, retainers, pins, backing plates, mounting bolts Brand new Focus RS OE Brembo discs. All that is required to fit these is a bracket (just knock one up in wood and get a machine shop to make for you) and some hoses to connect. http://img.photobucket.com/albums/v1...s/DSCF0411.jpg http://img.photobucket.com/albums/v1...s/DSCF0420.jpg http://img.photobucket.com/albums/v1...s/DSCF0422.jpg http://img.photobucket.com/albums/v1...s/DSCF0425.jpg Grp A Throttle Bracket SOLD Samco bottom water hose in Black £20 (bottom one in this pic) http://img.photobucket.com/albums/v1...1799Medium.jpg Full Samco boost set inc stainless boost pipe £100 http://img.photobucket.com/albums/v1...8/DSCF0470.jpg Early 2WD head needs an exhaust valve £350 includes everything apart from cams and tappets (can be supplied at cost) http://img.photobucket.com/albums/v1...l/DSCF0059.jpg http://img.photobucket.com/albums/v1...l/DSCF0064.jpg Pair of BD10's £120 the pair http://img.photobucket.com/albums/v1...l/DSCF0068.jpg http://img.photobucket.com/albums/v1...l/DSCF0071.jpg GL Spec Lamps SOLD Chrome cam cover 2wd with breather take off £70 http://i8.photobucket.com/albums/a35...t/DSCF0204.jpg Turd coloured cam cover with breather take off £60 http://img.photobucket.com/albums/v1...r/IMG_0120.jpg 2wd Flywheel dont think this has been skimmed but can measure £60 2WD Engine Arms £20 Powdercoated cam pulleys £40 as above ISCV £45 http://img.photobucket.com/albums/v1...1870Medium.jpg 2wd throttle body inc idle screw £45 as above black collins -31 actuator £40 http://img.photobucket.com/albums/v1...1959Medium.jpg 2WD FPR £20 |
Oh why o why when i'm skint :cry:
|
Right i need the following please:-
1x rubber engine mount door panel screws metal water pipe at bottom of rad fan switch plug with about 2" of wire left on rad mounts circlip that holds the speedo cable to gearbox drivers outer door window seal both front kick plates thats if your breaking fully |
shit man :(
what ya gunna do with front bumper/splitter? |
Hi Andy,
I fitted a new lower spoiler last year - same tape was on it mate so proper pucka ;-) Whats the deal on the upper spoiler mate? If it isn't gone can you pm me pls? |
another to the slaughter:cry:but i can understand your just trying to get some of you money back:(
|
price on upper spoiler and front bumper if rs500 mate
|
oh its so sad to see her coming apart!!
had a glimpse of the 3dr today and what a beaut' |
do you want to sell the upper spoiler aswell. cheers charlie.
|
Originally Posted by Barry R
(Post 3651579)
Right i need the following please:-
1x rubber engine mount door panel screws metal water pipe at bottom of rad fan switch plug with about 2" of wire left on rad mounts circlip that holds the speedo cable to gearbox drivers outer door window seal both front kick plates thats if your breaking fully
Originally Posted by boXXer
(Post 3651610)
shit man :(
what ya gunna do with front bumper/splitter?
Originally Posted by AndyPen
(Post 3651703)
Hi Andy,
I fitted a new lower spoiler last year - same tape was on it mate so proper pucka ;-) Cool nice to get that confirmed mate :top: Whats the deal on the upper spoiler mate? If it isn't gone can you pm me pls?
Originally Posted by col cos1
(Post 3651728)
price on upper spoiler and front bumper if rs500 mate
Originally Posted by rs_cos
(Post 3651905)
do you want to sell the upper spoiler aswell. cheers charlie.
|
how much for the ariel please:king:and the front splitter could you pm me:top:
|
how much for the ariel please?:)
|
Will have the grills if you post to Australia - post code 3081.
|
YHPM Andy ;-)
|
more stuff added
|
how much for the ariel please?
|
andy i'll have the k&n cone filter will take it off you!!
|
how much for the front spoiler posted?
cheers matthew |
Originally Posted by CRAIG HAYTER
(Post 3671167)
how much for the ariel please?
Originally Posted by RSCossieGaz
(Post 3671182)
andy i'll have the k&n cone filter will take it off you!!
Originally Posted by 3dr cossie
(Post 3671367)
how much for the front spoiler posted?
cheers matthew |
what size are the spokes in your signature, are they going ?
|
How much 4 the cxn wheels
|
Wheels should be going this week..................the amount of interest I've had in these I reckon I could have sold them 10 times over now :cry:
|
Originally Posted by rsnissan
(Post 3672423)
Wheels should be going this week..................the amount of interest I've had in these I reckon I could have sold them 10 times over now :cry:
|
Originally Posted by cossieprob
(Post 3672558)
Bugger id love them on my 3 door, if they dont go pm me. Out of interest what size r they and what r they new . thanks
wheels were approx 2200 inc everything. 9x17 on the back 8x17 on the front. I read somewhere that the dont make the same style anymore (the new ones have less spokes i think) so maybe thats why :? |
breather with hoses?:grin:
|
Originally Posted by rsnissan
(Post 3672617)
I cant believe the interested to be honest..............
wheels were approx 2200 inc everything. 9x17 on the back 8x17 on the front. I read somewhere that the dont make the same style anymore (the new ones have less spokes i think) so maybe thats why :? |
Im not as keen on the new style of cxn wheel...much prefer the older ones like rsnissan has sold.
Anyhows....you got me the details as to where I can send this here £3150 to fella? :lol: You've got a few other bits and bobs that im interested in but i'll have to wait till payday (hoping those bits aint sold by then) so the missus doesnt notice my bank account dropping too much in one go :cry: :cry: |
have you got the rear quarter window trims for sale ?
|
pm'd
|
andy i could be spending some money with you when i get paid ;)
|
hello mate i'll have the accelerator cable bracket if you've still got it mate?
|
what you doing with the fuel rail and quip mate?
|
my god andy i never thought you would break it mate shame really it is a good car very near copy to mine ....lol...
i suppose things happen i can understand tho there are some very good parts on it good luck marco |
pmd you fella
|
How much for the plastic bulk head panel please?
Lee |
Andy
do you know anyone going to the RSOC AGM this weekend , if you do and you still have it i will have the carbon 500 front splitter , but i wouldnt risk posting it so if you can get it to the AGM i can collect and pay cash Paul |
BTT more stuff added, will get back to everyone above later on this AM.
|
First dibs on SECS monitor please. PM sent.
|
Originally Posted by cosy trav
(Post 3672960)
have you got the rear quarter window trims for sale ?
Originally Posted by RONNIE AMIS
(Post 3673281)
hello mate i'll have the accelerator cable bracket if you've still got it mate?
Originally Posted by RONNIE AMIS
(Post 3673294)
what you doing with the fuel rail and quip mate?
Originally Posted by marco polo
(Post 3673327)
my god andy i never thought you would break it mate shame really it is a good car very near copy to mine ....lol...
i suppose things happen i can understand tho there are some very good parts on it good luck marco
Originally Posted by TiB
(Post 3673432)
How much for the plastic bulk head panel please?
Lee
Originally Posted by Rs500 Registrar
(Post 3673774)
Andy
do you know anyone going to the RSOC AGM this weekend , if you do and you still have it i will have the carbon 500 front splitter , but i wouldnt risk posting it so if you can get it to the AGM i can collect and pay cash Paul
Originally Posted by J9BBY
(Post 3673832)
First dibs on SECS monitor please. PM sent.
On another note someone else PM'd and has a full mailbox.......... kaisersolsay has exceeded their stored private messages quota and can not accept further messages until they clear some space. |
you have pm
|
All times are GMT. The time now is 03:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands