4x108 to 5x108 conversion help
 

I have a 2001 ford focus and is 4x108 and want to convert it to 5x108. Wanted to know how I could go about it? Really need some help with this.
Cheers

cant be done with hub adaptors pal i wanted to do the same myself but the holes are to close to do this

I was think more to do with swapping hubs or re-drill of the hubs. Wanted to know if it has been done before?

It has been done with redrilling. As far as im aware thats the only way. Weld the old holes up and re drill.

Not sure if 5 x 108 is also a Ford PCD, but if it is it may be possible to use C max 5 stud hubs, which are based on Focus's?

It is.

Easy conversion use ford transit connect front and rear hubs plus bonus is they were rear disk

I've done a few of these on my cars did the connect hubs on my focus few years ago, I've also converted an old rs turbo of mine to volvo hubs (look in my album) as I really liked the T5 wheels car looked great white S2 RST on Volvo T5 alloys

WES

Wes has it. The Connect is a focus (more or less!) I even used a heap of sensors off the engine of a Connect for my Focus.

Apologies for dragging up an old topic, Doga, can you give me more details on the conversion, I’m wanting to convert my Mk1 FRS to five stud?

Im sure I can get you PCD adapters for this conversion if you wanted to go down that route

I looked at these to convert 4x4 cosworth 4 x 108 to mk2 frs 5 x 108 through hubcentric not listed I'd be interested to know if you can get them

+1 me aswelll

I looked into it again john you cant get them I'm plug welding and re drilling mine but mine are cossie hubs alternative was custom hubs