sensors on mfi locations with pics help
 

Hi

got a feeling some of my sensors are not plugged into the right hole firstly have i got these lead clours right....

black - throttle postion
black - air bypass valve
biege aux air ( under the cold start)
green - knock sensor
blue - cold start
yellow - thermo time switch ECT ??
dark yellow temp sensor

Now im trying to located all of these sensors i know where the cold start is and thats about it can anyone provide a diagram or a pic for me
cheers

why would u say they are in wrong holes plus thermo is brown and there is only one yellow sensor ??

make a search here, you will find a photo with the correct location for each sensor

Yellow(S2) or white(S1) is ECT underneath inlet manifold, brown is thermo-time switch, green is knock sensor (later S2 only), blue is cold start fuel injector, black two pin is idle speed valve, black 3 pin is TPS, Air charge sensor is obvious!

Hope that clears that one up!

Heres a pic of my engine and sensor locations i did a couple of years ago....


http://i14.photobucket.com/albums/a3...Connectors.jpg

Just to make this a little more confusing..........

can anyone tell me what colour wires go to what colour plugs please?

Most of my plugs have been replaced with black ones, so I havent a clue what goes where