zvh pistons from yankeeland
PassionFord Post Troll
Joined: Jun 2003
Posts: 2,866
Likes: 0
From: Finland
These for example:
http://www.focus-central.com/catalog...d=1&sid=&pid=4
Just remember that the U.S boys never had the silver top zetec so all parts are for the black top.
http://www.focus-central.com/catalog...d=1&sid=&pid=4
Just remember that the U.S boys never had the silver top zetec so all parts are for the black top.
Too many posts.. I need a life!!
Joined: May 2004
Posts: 951
Likes: 0
From: MANCHESTER
10K+ Poster!!
Joined: May 2005
Posts: 13,798
Likes: 1
From: Cheltenham, Gloucestershire
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: May 2003
Posts: 1,240
Likes: 6
From: the land of oz slough
Originally Posted by safechav
you could get eagle h beam rods and je pistons for £500 max, i know because thats what i brought for my zvh but you will need to use a de-comp plate to reduce the compression to a reasonable level. i brought my rods and pistons from here www.nolimitmotorsport.com 
Trending Topics
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: May 2003
Posts: 1,240
Likes: 6
From: the land of oz slough
Originally Posted by safechav
I know what a rip!!!!!!!!
starting bid £425 when they retail for $330
K155MYRS
Joined: Aug 2003
Posts: 4,371
Likes: 0
From: NYC @ work NJ @ home
FPMSL at Yeeeehhhaaawww!!
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: May 2003
Posts: 1,240
Likes: 6
From: the land of oz slough
Originally Posted by Fastmaul
FPMSL at Yeeeehhhaaawww!!
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
HEADING OUT TO THE USA FOR THE SUMMER think i might have to be getting a set , anyone know if the do low comp jobbies ???
anyone rate the eagle rods then ., for that price id get two sets in case i bent one lol
anyone rate the eagle rods then ., for that price id get two sets in case i bent one lol
PassionFord Post Whore!!
Joined: Aug 2004
Posts: 3,928
Likes: 0
Originally Posted by Fastmaul
FPMSL at Yeeeehhhaaawww!!
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
Chineese made substandard steel with a wholesale price of $15 dollars per rod, also something about them not being recognised by the American Automotive Stadards? ( I assume by this he meant US equililant standards of manufacture & quality, similar to that of the German TUV standards)
But then I havent tested them so what would I know
K155MYRS
Joined: Aug 2003
Posts: 4,371
Likes: 0
From: NYC @ work NJ @ home
Originally Posted by B8
Originally Posted by Fastmaul
FPMSL at Yeeeehhhaaawww!!
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
on a side note, a mate had the Eagle beams in his engine and bent them. I also have another mate that said he doesn't like them either and he supplies parts like that.
Chineese made substandard steel with a wholesale price of $15 dollars per rod, also something about them not being recognised by the American Automotive Stadards? ( I assume by this he meant US equililant standards of manufacture & quality, similar to that of the German TUV standards)
But then I havent tested them so what would I know
turboboss,
the person this happend to I'm really not in contact with him anymore, I know it was turbo engine though.
If you guys are going to get stuff here, like rods, get something quality like Crower, Pauter, Carillo couple others but can't think of them right now LOL.
Thread
Thread Starter
Forum
Replies
Last Post
deathrider666
Technical help Q & A
3
Sep 28, 2015 06:12 PM