Anyone using one of Tonys t36 turbos, what sort of specs are you using ,cams injectors etc etc

 

The new ab07 inlet cam and 55's injectors 2.4 bar peak and 2 bar held on a standard engine

 

what power/torque will that give you Jay?

 

430 ish id guess

 

Yeh about 420 ish and 400 lb the head now is the limiting factor which is the next job but ill go the tt t38 route and a 14 inlet

 

Have you upgraded your gearbox or still using a standard 4x4 one?

 

Im on a oppliger gear kit as I didnt want to risk it

 

How come Jay?? I'd have thought your setup is a hoot bud??

 

Because bigger is better and im bored lol

 

why not go the whole hog and get a t4 next jay

 

Nah i like the tt range

 

jay what power will you expect out of a tt38 with a inlet?

 

What's the boost delivery like jay is it a nice drive able set up?

 

Yes mate its great mate make the t34.63 seem pedestrian off vacuum by 2000rpm full chat by 3200rpm great torque and holds on to the power much better than the 34 and the whistle from it is very cool lol

 

What are you expecting the powerband to be like when you switch to the tt38? I guess that would be similar to what cossie4i had on his car? Got a t38 on my car and thinking of uprgading to this spec t38 or going for a gt3071

 

Should be a touch better than steves old spec and also thinking on a bit of gas too lol

 

You say the new ab07. have they changed the profile of the ab07?

 

Anyone ever heard of a t38 with a .48 exhaust housing? I recently bought one it's supposed to be a t38 but has a .48 exhaust housing?
Jay, what nitrous kit you going to use? Iv got a wizards of nos direct port kit on my car +100 but not going to use it as it want to have someone who knows what their doing to set it up, any ideas where to take it? I know the l8 doesn't have switchable maps so I'm a bit stuck with it!

 

richard youll on here has nos on his saff im pretty sure his car is mapped by msd

 

Better than the 4i

Needs to go on the same hub dyno to find out

Nearly saved all the money to get the car back on the road

Steve

 

Good news Steve because we all know where your heart is

 

I would imagine it would be pretty pointless, where the t38 would really come to life would be high revs where the 0.48 will strangle it to death imo.

 

I have a T36 (0.55) on mine - like Jay's it is standard engine, YBO611, 55's, 500 intercooler, 044 etc. etc.

Haven't driven it yet but it made 415bhp and about 420lb/ft on MSD's owners at just over 2 bar.

Ben

 

That's what iv been thinking unless maybe the housing has been machined out possibly? All I want is 400hp as it's going on my Capri. Just hope I ain't been ripped off!

 

It will be great to get it back on the road

Steve

 

Good job steve be good to see it..

 

Ben is that with a AB07 ?

What price for a T36? and cam ?

Paul

 

Jays not man enough

 

Lol the tt38 flows 4 lb more air vut I did think old school

 

Yes mate, that is with an AB07 - all from Tony Mannock, give him a bell for a quote (I literally can't remember but it was reasonable).

Ben

 

Everybody runs MY cam these days

You all used to take the pi$$ as well lol

Steve

 

Excuse my ignorance I thought Cosworth cams were all BD something, what is this AB07 cam? What is the difference between it and a BD14 or BD16 cam?

 

its a cam specced by ahmed bajyoo

 

What is it designed to be used instead of? BD14 or Bd16? Just curious as have seen it mentioned on here before.

 

Its actually closer to bd15 but for standard pistons not so big lift

 

Fuckin pipe down in the cheap seats

 

At least I have a real Cossie and not a taxi

Steve

 

taxis rule, 3 doors drool!

 

BUT don't you wanna sell it??

saffs handle better

Paul

 

Take no notice lofty is just taking the piss because he knows I want one