....
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thanks for all the comments.
I have spent alot of time and effort to get the underside to a perfect condition. Only selling the car as I fancied a change, and need the funds to purchase my new vehicle.
This is a very rare car and if kept in this condition the value will only increase, so will be a good investment for the buyer.
I have spent alot of time and effort to get the underside to a perfect condition. Only selling the car as I fancied a change, and need the funds to purchase my new vehicle.
This is a very rare car and if kept in this condition the value will only increase, so will be a good investment for the buyer.
Trending Topics
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thanks mate.
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Same here, spent a lot of time doing all the restoration work on it and l am sure this will not depreciate over the next few years if looked after.
Here is a few more pictures of work gone into it.
Rub down all underisde paint to bare metal.

Applied first coat of Epoxy Mastic 121 in oxide red.

Second coat applied

Masked up areas for 3M body stone guard, wanted the factory look.



3M applied






De-masked

Primered up to see any imperfections

Guide coat for sanding

Engine bay painted.



Underneath painted, just need to spray lacquer now.




lacquer applied :coolsm:












Thanks
Here is a few more pictures of work gone into it.
Rub down all underisde paint to bare metal.

Applied first coat of Epoxy Mastic 121 in oxide red.

Second coat applied

Masked up areas for 3M body stone guard, wanted the factory look.



3M applied






De-masked

Primered up to see any imperfections

Guide coat for sanding

Engine bay painted.



Underneath painted, just need to spray lacquer now.




lacquer applied :coolsm:












Thanks
After all the hard work you have put into this car I am suprised you want to sell it? It seems the perfect base now to have a big bhp conversion on it.
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thanks
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thread Starter
Regular Contributor
iTrader: (1)
Joined: Jun 2010
Posts: 212
Likes: 1
From: West midlands
Thread
Thread Starter
Forum
Replies
Last Post
Billy_RS
Pictures, video & Photoshop Forum
16
Oct 11, 2025 09:41 PM










