Best Clutch Kit For YB 350bhp 320ft/lb
Sep 16, 2013 | 05:16 PM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Best Clutch Kit For YB 350bhp 320ft/lb
I want to avoid a paddle clutch if possible and will be staying cable not going hydraulic.
Last edited by Billy_RS; Sep 16, 2013 at 05:20 PM .
Sep 16, 2013 | 05:21 PM
I've found that life I needed.. It's HERE!!
Joined: Jul 2010
Posts: 1,453
Likes: 21
From: under the bed hiding
2wd or 4x4?
Sep 16, 2013 | 05:22 PM
I've found that life I needed.. It's HERE!!
Joined: Aug 2008
Posts: 1,037
Likes: 2
From: gibraltar/born bred in essex
Quote:
Originally Posted by
Billy_RS
I want to avoid a paddle clutch if possible and will be staying cable not going hydraulic.
i have the ap organic kit .been on 3 yrs and been holding around that figure no problem,dont know about know thou up the boost to 2 bar so we see lol
mark
Sep 16, 2013 | 05:31 PM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Edited to say its RWD.
Sep 16, 2013 | 05:32 PM
Joined: Oct 2007
Posts: 10,655
Likes: 18
From: swindon, wiltshire
whats the reasons for not wanting a paddle clutch or going hydraulic?
Sep 16, 2013 | 05:46 PM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Quote:
Originally Posted by
LHD220Turbo
whats the reasons for not wanting a paddle clutch or going hydraulic?
I don't like paddles and don't want to shell out for hydraulic conversion at the moment.
Sep 16, 2013 | 05:51 PM
I've found that life I needed.. It's HERE!!
Joined: Aug 2008
Posts: 1,037
Likes: 2
From: gibraltar/born bred in essex
Quote:
Originally Posted by
Billy_RS
Edited to say its RWD.
ap cover was complete kit from burtons
mark
Sep 16, 2013 | 05:57 PM
Joined: May 2004
Posts: 25,439
Likes: 19
From: Shutting down jap crap
Sep 16, 2013 | 05:59 PM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Think ill just go with the AP organic kit.
Thanks for the help people
Sep 16, 2013 | 06:13 PM
Joined: May 2003
Posts: 6,540
Likes: 11
From: Kent
Sep 16, 2013 | 06:54 PM
Joined: Jul 2005
Posts: 4,392
Likes: 140
From: Warrington
Helix 6 paddle kit from Matt Lewis Motorsport for me
Sep 17, 2013 | 07:26 AM
Too many posts.. I need a life!!
Joined: Dec 2008
Posts: 862
Likes: 1
From: Mannheim, Germany
I have an AP disc and standard cover at 340bhp (4x4). Even after many 1000 miles and hard launches it is still fine.
Sep 17, 2013 | 07:38 AM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Future proof it with a full AP Organic clutch kit, pedal is fine and Sheady advised me good for over 400bhp / commensurate torque.
Sep 17, 2013 | 08:15 AM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Quote:
Originally Posted by
PF Ben
Future proof it with a full AP Organic clutch kit, pedal is fine and Sheady advised me good for over 400bhp / commensurate torque.
Ok sounds like the way forward for me.
Next question is..... Where's best to get said kit from?
Sep 17, 2013 | 11:21 AM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Sep 17, 2013 | 11:58 AM
Thread Starter
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Quote:
Originally Posted by
PF Ben
Rainbird
Cheers Ben
Sep 17, 2013 | 03:02 PM
I've found that life I needed.. It's HERE!!
Joined: Aug 2008
Posts: 1,037
Likes: 2
From: gibraltar/born bred in essex
Sep 17, 2013 | 03:23 PM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Burtons never have it in stock!
Sep 17, 2013 | 03:49 PM
Joined: May 2004
Posts: 25,439
Likes: 19
From: Shutting down jap crap
Sep 17, 2013 | 04:06 PM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Would also advise getting it balanced with your flywheel - this chap is very good:
www.vibrationfree.co.uk
Ben
Sep 17, 2013 | 06:51 PM
Joined: Jul 2003
Posts: 6,150
Likes: 0
From: Edinburgh
Is this what your running at the mo Ben, the AP organic one?
Sep 17, 2013 | 07:53 PM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Yep, somewhere around the 360 mark but have been assured it will handle the 400bhp+ figure I'm aiming for.
Sep 17, 2013 | 07:54 PM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Yep, somewhere around the 360 mark but have been assured it will handle the 400bhp+ figure I'm aiming for.
Sep 17, 2013 | 08:03 PM
Joined: Jul 2003
Posts: 6,150
Likes: 0
From: Edinburgh
I was going to say your going for more aren't you as you sold that T34 recently.
Sep 17, 2013 | 08:28 PM
I've found that life I needed.. It's HERE!!
Joined: Jun 2003
Posts: 1,286
Likes: 3
From: Surrey
Sheady and rain bird recommended it, rainbird supplied it
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
arkeye
Ford Focus ST
1
Feb 20, 2016 01:22 PM
Best Clutch Kit For YB 350bhp 320ft/lb
