1989 RWD Sierra Sapphire shell price reduced (£200)
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
1989 RWD Sierra Sapphire RS Cosworth shell for sale.
Diamond white, still has M.O.T and TAX.
RSOC Member car, looked after and loved for the past two years. If I had the space I would keep hold of it but needs must and the new project is taking priority now.
Shell will come with the following:
All doors with cosworth mouldings, wings with cosworth mouldings, sunroof, all exterior plastic trim, all glass (every glass panel is original with etched glass, headlights, clear indicators, clear side repeaters, smoked rear lights and black numberplate board, grill, headlight wipers, scuttle panel, wipers, number plates, locks, keys, ignition barrel, indicator stalks, heater matrix, pedals , boot carpet and trim, set of vibe speakers in rear shelf, spare sharktooth alloy in the wheel well with good tyre.
Comes with I.D and logbook.
I may even have a few spares that can go with the car that may help you to complete.
The car is straight and true, has a couple of rust spots on two of the doors, needs a couple of little patches welding underneath and the sunroof does not open. (Never has since I've owned it)
Car will NOT be rolling.
£200!
If you are interested in the shell then text,ring, or PM me
07528023935 Billy


As you can see in the pics, there is a little bit around one of the seat mount points and the front jacking points are a bit squashed. But ive tried to get both the sills in the pics as they are in really good condition. I just ended up going round the car and trying to find 'bad' points as id rather be upfront and honest instead of wasting anyones time.




























Diamond white, still has M.O.T and TAX.
RSOC Member car, looked after and loved for the past two years. If I had the space I would keep hold of it but needs must and the new project is taking priority now.
Shell will come with the following:
All doors with cosworth mouldings, wings with cosworth mouldings, sunroof, all exterior plastic trim, all glass (every glass panel is original with etched glass, headlights, clear indicators, clear side repeaters, smoked rear lights and black numberplate board, grill, headlight wipers, scuttle panel, wipers, number plates, locks, keys, ignition barrel, indicator stalks, heater matrix, pedals , boot carpet and trim, set of vibe speakers in rear shelf, spare sharktooth alloy in the wheel well with good tyre.
Comes with I.D and logbook.
I may even have a few spares that can go with the car that may help you to complete.
The car is straight and true, has a couple of rust spots on two of the doors, needs a couple of little patches welding underneath and the sunroof does not open. (Never has since I've owned it)
Car will NOT be rolling.
£200!
If you are interested in the shell then text,ring, or PM me
07528023935 Billy


As you can see in the pics, there is a little bit around one of the seat mount points and the front jacking points are a bit squashed. But ive tried to get both the sills in the pics as they are in really good condition. I just ended up going round the car and trying to find 'bad' points as id rather be upfront and honest instead of wasting anyones time.




























Last edited by Billy_RS; Sep 9, 2013 at 09:10 AM.
Trending Topics
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
I'm in Luton, beds. Junction 10 of the M1.
If you already have engine running gear etc then this is perfect for what you want.
By all means give me a ring an you could have a look at the car at ford fair if that's more convenient?
Cheers Billy
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
hi bud, can you give me detailed pics of all areas underneath, and rust areas on doors etc? and as many pics as you can of the shell i.e boot floor inners interior etc. I can pm you with my email address im very interested mate. I know its a ball ache taking the pics but im not a messer or time waster its just your about 2 and half hours away
appreciate it cheers,
anton
appreciate it cheers,
anton
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
hi bud, can you give me detailed pics of all areas underneath, and rust areas on doors etc? and as many pics as you can of the shell i.e boot floor inners interior etc. I can pm you with my email address im very interested mate. I know its a ball ache taking the pics but im not a messer or time waster its just your about 2 and half hours away
appreciate it cheers,
anton
appreciate it cheers,
anton
Cheers billy
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Just so you know I won't be stripping the car til after ford fair (August 11th)
I'm keeping it quiet for now mate
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
It's not a minter, but it's a clean solid car. Nice to meet you btw

Take my number and have a look at ford fair if you like mate
I can't make ford fair, charity shield that day :s send us as many pics as poss bud, and if everything ok, I'll sort a deposit out with you. Will you be breaking straight after ford fair? If so that's cool with me bud 
Cheers,
Anton
Cheers,
Anton
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
If so the price may have just gone up

Joking!
Ill get the pics over to you via email as soon as I can, and yes I'll be breaking straight after ford fair
Cheers billy
PassionFord Post Whore!!
iTrader: (1)
Joined: Jun 2008
Posts: 6,807
Likes: 0
From: south wales, swansea
Gotta say I did this with my cos and its certainly the best way,pointless chasing a rotten shell as unless you've got the patience of a saint and deep pockets you'll be worse off.
Plus buying fully trimmed means you either get a ton of spares or a few bob back in your pocket.
£1800 will only just about cover a respray on any shell let alone a rusty welded up dog!!!!
Great bargain this
Plus buying fully trimmed means you either get a ton of spares or a few bob back in your pocket.
£1800 will only just about cover a respray on any shell let alone a rusty welded up dog!!!!
Great bargain this
as long as its rolling on something I aint bothered
and take it theres no sagging on the front bumper mate? and just had a look reckon it would only take me 2 and a half hours or so in the lowloader to luton.
and take it theres no sagging on the front bumper mate? and just had a look reckon it would only take me 2 and a half hours or so in the lowloader to luton.
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Yeah I've done Luton to Alton towers in 2 hours ish and I went Shrewsbury in an hour an 45 last week. It's not that bad really
I'm hoping to get alot of photos done today/tomorrow and will email them over to you ASAP.
Billy
Gary Krishna
iTrader: (9)
Joined: Mar 2008
Posts: 4,029
Likes: 67
From: Rickmansworth, Hertfordshire.
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds
Thread Starter
PassionFord Post Whore!!
iTrader: (5)
Joined: Jun 2005
Posts: 6,104
Likes: 47
From: Luton, Beds







