THIS WILL BE SOLD AS A SHELL
NO MOT OR TAX

ENGINE


engine has had every gasket replaced with cometic gaskets
denso ik27 spark plugs , motorsport leads, brand new ina lifters,
forge low comp pistons,
bored out 0.5ml with over sized low comp pocketed cosworth pistons to match
acl bearings,
the head has been gas flowed and new oil seals
uprated oil pump,
oil cooler kit,
wrc victor reinz headgasket,
new uprated kent cambelt,
bd10 cams verniers,
dash 34 collins actuator with greddy electronic boost controler
alloy rad,
rs 500 intercooler,
plunium spacer,
t34 turbo with 360 degree thrust bearing,
403 injectors,
msd evo chip,
with waisted spark kit,
new engine loom from burton power,
fully samco d hoses,
rebuild gearbox and diff
uprated fuel pump,
and fuel pressure reg from msd,
6 long studded kit,
brand new front pads discs and callipers
coilover kit made by gaz,
new rear discs and pads,
pollybushed,
baileys oil breather system

Interior is excellent

 

Hi, how much (individually) for:-

Water swirl pot
K&N air filter
Fuel pressure reg (is it adjustable?)

Ta,

TT

 

His much for engine loom??

 

The poor car...They cant be many of that colour saffs left.

 

this will be back on the road for sure mate as i will defo make sure!!!!

 

the engine loom with the burton power part is £150 plus post £10

Water swirl pot £45
K&N air filter £45
Fuel pressure reg (adjustable) £45

 

front bumper?

 

how much for the rolling shell including interior?

 

Rs500 inter cooler ? Size of pipes ?
And vent gauge setup

 

Rolling shell inc interior with panels £2500 inc id
basically all the engine and gearbox taken out

 

Rs500 intercooler takes standard size pipes mate £135
gauges in the centre vent are £50 posted

 

FRONT BUMPER IS £120

 

i need a mint one let me know if you get one in

 

Do you have a stainless middle and rear if so how much posted ?? Cheers

 

Do you have a roof lining??

 

dame lol! Was after t34 just brought a bike, probably not got the funds for it now. How much posted, if still about I enquire next pay day! If its gone its gone thanks regards mark

 

How much for the part of the rear driveshafts that bolt into the flange?both sides.

 

why are you breaking it? Could be intrested in the complete car mate?

 

How much for front pads discs callipers and hubs?

 

hi all
Update: the car has been sold now and going back on the road
the engine and gearbox has been removed as he had one to put in that he rebuilt
So what is left from the car is all the engine bay inc the loom etc and the gearbox

 

Oil breather price?

 

least the old girl as found a new lover!

 

Hi

How much posted for the turbo?

Thanks, Joe

 

Hi mate
i want £475 for the turbo as its virtually new

 

SAFF LATTICE WHEEL AND D40 TYRE
EXCELLENT CONDITION AND LOOKS LIKE NEVER FITTED AND THE TYRE LOOKS UNUSED £OFFERS

 

How much for the gearbox?

 

the box is £550 mate 65k miles

 

Hi
Do you still have the throttle position sensor?
cheers

 

yes mate for a 2wd £35 plus £5 post mate

 

Glad the car is back on the road.Would you sell one shark tooth alloy.I could do with one as a spare.

 

possibly mate as i have one spare £55 plus post and thats with tyre

 

Can you give me a price for a aftermarket 4x4 down pipe posted to brum please Gary if you have one

Cheers David

 

They are £60 posted mate

 

How much for front set of shocks and hubs off a Cossie for my xr4i as I want to upgrade my brakes?
Prefer adjustable shocks maybe interested in the discs and calipers too
Cheers

 

Hi,do you have a 3 bar map sensor?-if so how much?

 

sorry no 3 bar at the moment

also the shocks that i have are 4x4 konis n
no hubs

 

You have a std 2wd turbo heat shield?

 

Sound pm me your email address and ill PayPal you the money over

David

 

my paypal is rsclassics360@gmail.com and please send as a gift and also write in the posting addresss and what you are buying

 

Ok thanks
I was assuming that you were replying to my question about 4x4 cossie 3"downpipe for £60
posted
Is that correct?

Are they stainless steel?

David