I'll get some pics up later as I'm in work. The engine is still fitted so can be heard running. Runs perfectly. It had the Ford service at 60k with new belt, tensioner and waterpump and is now on 70k so its ready to drop straight in.

It's fitted in a Mk2 Fiesta, so has a 220mm fywheel and clutch, XR2 alternator and extra idler pulley. These are available seperately along with lots of other items.

The price is for the bare engine with sensors, thermostat housing and Denso ITV22 spark plugs. The plugs are only 500 miles old as is the Millers CFS 5w40 oil in the sump so I won't drain it.

£700 collected.

I can deliver for an extra £60 and I have a pallet available however it will mean draining the oil which I could put into a container and ship with the engine if required. It would be a waste of £60 on good oil otherwise.

If paying by PayPal then the fees will be on top. £24 for just the engine or £26 for the engine and pallet delivery.


Here is the engine just before I fitted it

 

where you located and do you have turbo and manifold ?

 

If he doesnt i have frs standard manifold

 

I'm based in Llandudno, North Wales.

Yes I have the standard manifold and Garrett GT2560 turbo, the manifold has the standard heatshield. The turbo has an Owen Developments turbo jacket. The water and oil feeds for the turbo are also standard. The decat is a stainless 2.5" with heatwrap.



I have an uprated Forge actuator for the turbo too if required.

 

pm sent

 

i want the whole engine mate sent ya a pm

 

is this sold?

 

No its still available. Got a couple of guys interested but no payment taken yet.

I can supply it with the extra idler pulley, alternator and belt if required. It also has a brand new dipstick and tube and a high pressure oil switch (20psi).

 

if the engine is avalible ill have the engine

 

Engine has sold