this is the early stages at the moment as i'm seriously considering breaking my xr2, due to time commitments and wanting a newer more prestigious daily something has to go.
exhaust system, 3" stainless and heat wrapped, for an xr2, easily adjusted to suit other cars, v band flange, twin boxes 4" tail piece with lambda boss installed £200

there is an extra box fitted to the system after this pic

starter for mtx75 from st170 £40

megasquirt II v3.0, setup for wasted spark, is ready for 4 COP's, cam phase sensor circuit, launch control, iscv control. had been checked over last year by James murray and given a clean bill of health. will include home made loom for zetec turbo, no issues with interference, very stable tps and cps signals.
£450

jvc kd-avx2 head unit with ipod interface, remote and case all there, no dead pixles £80
vibe twin 12" sub woofers in enclosure, but of scuffing to box £100
vibe monoblock 4 amp, peak at 2800watts @1ohm £140
3 farad power capacitor £40
splx 1000watt four way amp £50
vibe se k series 6x9's in black carpeted parcel shelf made from 18mm plywood, with hinges and lifting rubbers £80
vibe slick 40 4" door speakers £30
all the above ICE can be done in a deal along with cabling and surround for boot install as mine is laid out for £450

recaro front seats, good condition, rear bench and backs re-trimmed to match, all in 88 spec for xr2 £200

momo steering wheel, very good condition, with boss for fiesta and snap off boss £120

xr2 rad, standard with erst fan fitted £50

turbo smart kompact adjustable dump valve £50

mk2 fiesta strut brace modified to clear bigger inlets £50

big brake conversion, frs callipers, discs and ferrodo pads, complete with brackets (for mk2 fiesta) and braided flexy hoses £250



*****taking deposits/payments, 10% via paypal sgard99@hotmail.com******

pics can be found in my thread as i can't access photobucket right now.
thanks,
sean

p.s. drop me a text on 07800760221 if you want to talk more, i won't be able answer calls most of the time, but can with a text.
postage is extra unless agreed otherwise.

 

Why i will be intrested on the wideband though

 

Have you got focus rs drive shafts? Maybe intreasted in the box

 

just don't have time to use it, not enough spare cash to keep putting rubber on tyres and general wanting to improve it further. shame as it's a hoot, had 1.8BAR through it so far and it's just so powerful, no smoke, rattles, oil pressure is good etc.

which wideband are you interested in?

 

i'm afraid not, been in an xr2, nothing really different in frs shafts to other focus ones with the mtx box fitted though

 

Ok mate, what sort of deal would you do for box, turbo, mani, wasgate?

 

well it's £1390 for that off the list, could drop off £50.
until i get to £4k, it won't go anywhere though, so engine needs to be going first.

 

Ok bud, could i have first divs on it if can reach the 4k mark?

 

i don't see why not.
i'll wait till i can get a buyers for parts, take deposits then commit to stripping it.
i have my own tools etc. so parts can be out next day in many cases.

 

Ok cheers mate

 

Will have the injectors if you break it

 

can you put my name down for the rev counter please

 

Ime after the innovate mtx wideband*

Shame your selling up though. Would have been good to see how the car performed

 

i bought the wideband less than a month ago, fitted it two weeks back and done nothing with the car, one of those things hey. i think i will get it on a set of rollers if i get time before being broken and deposits taken, many years in the building, i just wish i had more time and some free cash.

as for the rest, i will provisionally put names to parts tomorrow in order of requests being placed on thread or via pm.

 

I'd take the stack speedo to suit mtx!

 

May have the alloys too, got any pictures.

 

more pics added

 

Will have the alloys too

 

Are you selling the shell?

 

the shell was a cat c a couple of years back, not the worst example, but i don't see why not. i wouldn't expect to see much for it though.

 

Il have the shafts

 

Would the oil cooler sandwich plate fit a silver top??And would you split and sell the sandwich plate and oil pipes????

 

yes it will fit, i've had it on a silvertop previously.
not wanting to split as it's harder to sell off the parts, but realistically would have to be around £70 to bother, then you need to make sure you have the same 5/8" fittings.

 

i'll bob your name down

 

Ok m8 i will check mine when i go in the shed again and get back to you...

 

i will be taking deposits on items as from today through paypal.
final payment can be made through bank transfer or paypal including any postage on top, leave a message of who you are and what the money is for.
parts will be stripped out from next week and aim to have the smaller parts ready to go by the end of next week once payments have been made in full.
initial 10% deposits secure the parts, this is non refundable to ensure the parts go and expect full payment within two weeks.
collection is fine along with cash.

thanks sean gardner

sgard99@hotmail.com

 

Deposit for stack speedo to suit mtx on its way!

 

Money sent.

 

pm sent

 

How long are you reserving parts for?
I want the wideband !

 

i'm taking deposits now, to break in a weeks time. so i'll wait till weekend for deposits to be in, then crack on with it, or take provisionals off the list.
that's why i've put up only 10%deposits, if you can't afford that now, in a couple of weeks its unlikely to afford the rest of the cost.

 

Cool. Well I've got the money now... but its reserved for somebody who posted an interest. Bagsy second dibs asap!

 

Is the head unit in good nick? does it have the metal case for fitment with it? Is it blown?!!

 

head unit is fine, works, can get a vid to show that this aft when i start it up for it's weekly session.
cage is there, remote, ipod interface, case for front, even the manual somewhere.
no broken buttons or anything like that, cracking unit, get a screen and play dvd's through it with zoning for speakers if you like.

 

just curious what you would offer for the shell, i've had another interested, but i can't make it rolling as cv's are being sold off with shafts and suspension is going (i could keep the rear rolling though).
if i didn't need the cash i'd have kept some of it for the future.

 

Can you send me your PayPal mate and il send you a deposit for the shafts friday

 

Can you send me your paypal address aswell please

 

paypal is in the thread, but to save time : sgard99@hotmail.com

 

more items sold, awaiting deposits for some items still, will remove names off these items tomorrow unless contact is made.
car has done it's final runs now, parts starting coming out tomorrow due to being let down with help today.

 

removed all sold items, provisional/deposited items remaining till full payment made.