Pro Alloy Fuel Swirl Pot - Never Used! SOLD
Thread Starter
Borg Warner EFR Equipped!
Joined: Apr 2005
Posts: 5,810
Likes: 2
From: In the unit, building a 450bhp Time Attack Focus!
Well, as i'm getting everything ready for my Time Attack car build and i've just checked this years regs, I need a smaller swirl pot so that I can put a firewall over the top.
Sadly this one is too tall as all my fuel system is going to be mounted in my spare wheel well.
I had it made by Pro-Alloy a couple of years ago and whilst it got fitted in my old build, it never got used so has never had fuel in it.
Its got a -10AN fitting at the bottom and 3 x -6AN fittings at the top, as shown in the pictures below.
From memory, it cost me £150, so will take £100 on it.


Sadly this one is too tall as all my fuel system is going to be mounted in my spare wheel well.
I had it made by Pro-Alloy a couple of years ago and whilst it got fitted in my old build, it never got used so has never had fuel in it.
Its got a -10AN fitting at the bottom and 3 x -6AN fittings at the top, as shown in the pictures below.
From memory, it cost me £150, so will take £100 on it.


Thread
Thread Starter
Forum
Replies
Last Post



