A1 rally sport stage 3
had my car up at A1 today for a full setup and it runs better than ever now. i fitted greens and a chip brought from steve and a 3 bar from matt lewis and left it with steve to set it all up. the car now runs like an absolute dream and i am very happy with it even though my clutch is now slipping a bit but to be fair it wasnt great to begin with.........job for the weekend
Trending Topics
It's weekend 
As for injectors, i've tried 803's, 403's, 55's & now 83's (untested) but the 55's are by far the only ones i would use for that stage of tune.
Did A1 build your motor?

As for injectors, i've tried 803's, 403's, 55's & now 83's (untested) but the 55's are by far the only ones i would use for that stage of tune.
Did A1 build your motor?
no but he recommended the best way to go with my car. by wot your saying he has done it all wrong i will have to let him know
Like fuck he does, he can maybe build engines but going off the stories i've been told his engines are not the best by far
[QUOTE=BRAMMER;5684545]Apart from a car that's built the new way - compare it what's leaving the MAD garage
i think he will be out and about a bit more with this one and i think u will have to eat a bit of humble pie mate
i think he will be out and about a bit more with this one and i think u will have to eat a bit of humble pie mate
Like fuck he does, he can maybe build engines but going off the stories i've been told his engines are not the best by far[/QUOTE]
u shouldnt listen to storys coz after a few people have passed them on they end up just that...................storys. if you havnt had first hand experiance with someone then you shouldnt really openly slag people off.
u shouldnt listen to storys coz after a few people have passed them on they end up just that...................storys. if you havnt had first hand experiance with someone then you shouldnt really openly slag people off.
I've had one of his engines and it was shit, the head had been dropped prior to being fitted and was just slapped on, the fully ported Ł1000 head was past its last skim, probably something they desperately wanted rid of and it ended up on there, brand new ( well few k old ) 200 block cracked in several places, bolt holes full of shit.
Trust me mate, not ALL of Steves engines have been good ones, I have no doubt that he has built some storming engines though, I know people with some but if he can mug you off, I feel he will.
I have used someone not far from him with good results, only problem being the time that anything takes to get done ! all that aside though he does build some good engines and wouldn't mug you off with parts past their sell by date !
Last edited by JonnyBravo; Nov 2, 2011 at 11:42 PM.
Old hat as in old bits as new school is things like wet linnered blocks modern injecters and ecu,s that can be mapped better gt/other modern types of turbo or even the latest style twin scroll with modern better flowing manifolds and external waste gates all things that are relatively new on cosworths! think back 5 or 6 years people were not getting over 600 bhp but now there are m.a.d cars with 600 - 800bhp with huge low down torque and power!
Last edited by ajamesc; Nov 3, 2011 at 11:23 AM.
Trust me mate, not ALL of Steves engines have been good ones, I have no doubt that he has built some storming engines though, I know people with some but if he can mug you off, I feel he will.
I have used someone not far from him with good results, only problem being the time that anything takes to get done ! all that aside though he does build some good engines and wouldn't mug you off with parts past their sell by date ![/QUOTE]
are you talking about glyn by any chance
I've had one of his engines and it was shit, the head had been dropped prior to being fitted and was just slapped on, the fully ported Ł1000 head was past its last skim, probably something they desperately wanted rid of and it ended up on there, brand new ( well few k old ) 200 block cracked in several places, bolt holes full of shit.
Trust me mate, not ALL of Steves engines have been good ones, I have no doubt that he has built some storming engines though, I know people with some but if he can mug you off, I feel he will.
I have used someone not far from him with good results, only problem being the time that anything takes to get done ! all that aside though he does build some good engines and wouldn't mug you off with parts past their sell by date !
Trust me mate, not ALL of Steves engines have been good ones, I have no doubt that he has built some storming engines though, I know people with some but if he can mug you off, I feel he will.
I have used someone not far from him with good results, only problem being the time that anything takes to get done ! all that aside though he does build some good engines and wouldn't mug you off with parts past their sell by date !
Yes mate
I've found that life I needed.. It's HERE!!
Joined: Feb 2009
Posts: 1,373
Likes: 2
From: in front of u
Originally Posted by waynev1979
i think he will be out and about a bit more with this one and i think u will have to eat a bit of humble pie mate
u shouldnt listen to storys coz after a few people have passed them on they end up just that...................storys. if you havnt had first hand experiance with someone then you shouldnt really openly slag people off.
U just said Steve was?[/QUOTE]
i would have glyn build me an engine over steve any day
but he is so hard to get as he is soooooooo busy
you know to well what steve is like as you worked there lol
take gooses mk1 escort for example
i would have glyn build me an engine over steve any day
but he is so hard to get as he is soooooooo busy
you know to well what steve is like as you worked there lol
take gooses mk1 escort for example
Last edited by v man; Nov 5, 2011 at 10:12 AM.
i would have glyn build me an engine over steve any day
but he is so hard to get as he is soooooooo busy
you know to well what steve is like as you worked there lol
take gooses mk1 escort for example[/QUOTE]
Was that a mk1 shell that Glynn ended up finishing by any chance ?
I saw one that had come from steve and the work was beyond rough, hard to believe he does his own focos shells after seeing that tbh
but he is so hard to get as he is soooooooo busy
you know to well what steve is like as you worked there lol
take gooses mk1 escort for example[/QUOTE]
Was that a mk1 shell that Glynn ended up finishing by any chance ?
I saw one that had come from steve and the work was beyond rough, hard to believe he does his own focos shells after seeing that tbh







