Restorations, Rebuilds & Projects. Restoring her to Concourse? Just getting her running again? Or got a mad project? This is your room.

My on going Ghiax 4x4 rebuild from ground up(Ready for engine)

Thread Tools
 
Search this Thread
 
Old Oct 31, 2010 | 12:07 AM
  #1  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default My on going Ghiax 4x4 rebuild from ground up(Ready for engine)

Hello folks Hows the form As in the title im posting up a few bits and bobs of my on going project from september time last year

Just a little bit about the car itself now The model of the car is a Ghia x 4x4 which comes complete with with the full 4x4 set up and a 2 litre twincam (dohc) engine leather seats and all the other bells and whistles

The car itself was brought out of england by a ford dealer Kennedy ford now lindsay ford The car now has 84800 miles on the clock and i am now the 4th owner of the car

It made an appearance at most of the northern ireland shows last year but took it off the road due to the failure of the front diff

So without further ado i introduce u to the car i call my baby The ghia x 4x4

Hope u enjoy the pics folks

Comments and opinions welcome





Last edited by ghia4x4; Apr 30, 2011 at 06:58 AM.
Reply
Old Oct 31, 2010 | 04:25 PM
  #2  
Glenn_'s Avatar
Glenn_
Glennvestite
15 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Jul 2006
Posts: 62,772
Likes: 1,050
From: Darlington county durham
Default

Thats mint mate i like it.Any more pics if it.
Reply
Old Nov 1, 2010 | 08:45 PM
  #3  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Yeah lad i do indeed mate thanks for the good comment mate much appreciated all bein well she will be on display at ford show next year

Here is a few more pics of the attempt to tidy the underside of the car to suite my standards lol

The day a bought her





After a little detailing i done myself when i took her off the road as an every day car



Reply
Old Nov 1, 2010 | 08:53 PM
  #4  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

hi stewart the car is a real credit to u and cant wait until we get a run in her when its finished, even though u know how deeply i think of the pug lol

keep at it lad
Reply
Old Nov 1, 2010 | 09:06 PM
  #5  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Cheers trevor lad will take ya up the road for pinks when u get finished lol
Reply
Old Nov 1, 2010 | 09:08 PM
  #6  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

Originally Posted by ghia4x4
Cheers trevor lad will take ya up the road for pinks when u get finished lol
kfc and back lol
Reply
Old Nov 1, 2010 | 09:13 PM
  #7  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

U b uying that day if so ill hav my popcorn chicken lol
Reply
Old Nov 1, 2010 | 09:20 PM
  #8  
-beefy-'s Avatar
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
Joined: Sep 2005
Posts: 10,072
Likes: 3
From: cleveland rsoc
Default

looks like a cracking base for a resto mate !!


all the best with it


beef
Reply
Old Nov 1, 2010 | 09:28 PM
  #9  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Cheers beefy yeah she is a solid we motor i was pleased with her when i got her but as every1 knows they always like to do things to make it better to compete with other cars at shows lol

Ill be posting pics of step by step of my build provided the thread does not get spammed again as i had to close my last 1 due to it bein spammed

Hav u any projects ongoing urself mate????
Reply
Old Nov 7, 2010 | 08:31 PM
  #10  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Ok folks just a small update on what has went on the past few days

Got the car up and the rear beam out





Then got to work on the underseal and unearthed a few horrors truth be told







Plans for the next few weeks is finish stripping the underseal and get her sandblasted and wave goodbye to the surface rust

Last edited by ghia4x4; Nov 7, 2010 at 08:35 PM.
Reply
Old Nov 7, 2010 | 09:04 PM
  #11  
Sideways_Susan's Avatar
Sideways_Susan
Regular Contributor
 
Joined: Nov 2010
Posts: 223
Likes: 0
From: Omagh, Northern Ireland
Default

Good job lad keep at her
Reply
Old Nov 7, 2010 | 09:12 PM
  #12  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

I do intend to lad the way that wind is blowing tonight i mite be looking for a new shell for her lol
Reply
Old Nov 7, 2010 | 09:13 PM
  #13  
Sideways_Susan's Avatar
Sideways_Susan
Regular Contributor
 
Joined: Nov 2010
Posts: 223
Likes: 0
From: Omagh, Northern Ireland
Default

Dont be sayin that lad lol. Get the baler twine out lad and get her secured down nicely lol
Reply
Old Nov 7, 2010 | 09:14 PM
  #14  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

if mines falls, im taking yours so no worries stewart
Reply
Old Nov 7, 2010 | 09:22 PM
  #15  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Take ur pick from the 3 o mine up the back by all means i wont fall out with ya lol

The xr4x4 is already 4x4 so ya dont need to modify lol
Reply
Old Nov 7, 2010 | 09:23 PM
  #16  
Dan_RS500's Avatar
Dan_RS500
Regular Contributor
 
Joined: Aug 2004
Posts: 337
Likes: 6
From: Stornoway, Isle of Lewis.
Default

Good stuff getting stuck in there! Looks like you caught the damp just in time, should be cracking motor when done
Reply
Old Nov 7, 2010 | 09:35 PM
  #17  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Originally Posted by Dan_RS500
Good stuff getting stuck in there! Looks like you caught the damp just in time, should be cracking motor when done
I did indeed mate thanks for the possitive comment from both urself and every1 else

Always was convinced the wax oil was there to hide something and when i chased up the previous owner of the car it was said that the car was parked up in a field for a few months

By doing what ive done over the past year with her it has shown that the best of cars can deteriate slightly with age lol but now i know exactly what i hav as i was there chipping in with the work every step of the way and hav personalised a few bits and bobs to suite myself
Reply
Old Nov 7, 2010 | 09:40 PM
  #18  
RAPID 3DR's Avatar
RAPID 3DR
Advanced PassionFord User
 
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
Default

Originally Posted by ghia4x4
I do intend to lad the way that wind is blowing tonight i mite be looking for a new shell for her lol
maybe you should look into surcuring the car on something more stayble,not wheels & bricks
Reply
Old Nov 7, 2010 | 09:47 PM
  #19  
Zetecfiesta's Avatar
Zetecfiesta
PassionFord Post Whore!!
 
Joined: Jan 2005
Posts: 4,186
Likes: 0
From: Westhoughton Bolton
Default

very nice mate!
Reply
Old Nov 7, 2010 | 09:50 PM
  #20  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Lad that was the work that was happening last year only got around to putting them up but at the min its in a garage but its getting real stormy in northern ireland its on its way to a town near u tomorrow by the sounds of the met office lol
Reply
Old Nov 7, 2010 | 09:52 PM
  #21  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

is my car safe?
Reply
Old Nov 7, 2010 | 10:05 PM
  #22  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Originally Posted by Zetecfiesta
very nice mate!
Thanks mate it had got a lot of folks votes at shows last year i remember the first show i had her at there was a fella trailed his girl around the show to see my motor (Past 3 cossies by the way) and i overheard him saying she was the mintest twin cam engine bay he had ever seen and it brought a smile to my face lol
Reply
Old Nov 20, 2010 | 08:29 PM
  #23  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Folks sorry about the delay in getting updates on the thread

As said in the intro the work was carried out last year and after the worst weather last year which led to many sleepless nites due to gale force winds blowing

The progress from the last update is as follows

The car lifted higher off the ground and well supported with steel wheels



Spripped the running gear etc out of her (some very nervous moments i can tell ya)





Got the rest of the seal of the floor and then waited for the sand blaster to come on the date booked





Was a lot of hard work but it has all paid dividends in the long run As the say no pain No glory lol
Reply
Old Nov 20, 2010 | 08:32 PM
  #24  
Sideways_Susan's Avatar
Sideways_Susan
Regular Contributor
 
Joined: Nov 2010
Posts: 223
Likes: 0
From: Omagh, Northern Ireland
Default

nice update lad getting on well with her now
Reply
Old Nov 20, 2010 | 08:34 PM
  #25  
scottyrs's Avatar
scottyrs
DURHAM RSOC
iTrader: (1)
 
Joined: Oct 2009
Posts: 4,490
Likes: 1
From: NORTH SHIELDS
Default

well done mate keep up the progress should be good when finished
Reply
Old Nov 20, 2010 | 08:36 PM
  #26  
crumpet's Avatar
crumpet
Advanced PassionFord User
 
Joined: Oct 2009
Posts: 1,713
Likes: 0
From: Midlands
Default

How the fuck did you get her up there pal?! needs a YB in there!
Reply
Old Nov 20, 2010 | 08:36 PM
  #27  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

Originally Posted by crumpet
How the fuck did you get her up there pal?! needs a YB in there!
muscles mate
Reply
Old Nov 21, 2010 | 12:04 AM
  #28  
RAPID 3DR's Avatar
RAPID 3DR
Advanced PassionFord User
 
Joined: Nov 2009
Posts: 2,074
Likes: 1
From: midlands
Default

what did the twincam perform like with it being 4x4 cause i got a twincam(2wd) & its fooking shit slow & sounds wank
Reply
Old Nov 21, 2010 | 08:49 AM
  #29  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Thanks for all the possitive comments folks We got her up with a trolly jack

It was a slow job up at the front steadied with rims up at the back steadied so on and so forth Thank god i didnt smoke a 20 pack would not hav lasted long that day lol

The car in all honesty only got a little squirt here and there she was not abused cause the only time i more or less had her out was to and from shows but on the rollers she was throwing out 120 bhp She had a fairly decent lift dont get me wrong like but i apologise for not bein able to help ya out in that end mate

Again thanks for the comments More progress pics to follow soon
Reply
Old Nov 25, 2010 | 12:56 PM
  #30  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

Ok folks just a little update here

Once again thanks for all the positive comments so far

Got the car sandblasted at the start of the week could not hav picked a better day for the job the fella came down first thing and was away again within 4 hours

We (myself and cossie09 Big thanks to him by the way) saeled her with red oxcide as soon as the tools were left down to prevent the damp getting in to undo all my hard work

Let the work commence




Now the sealers



This sealer has a 25 year corrosion warrenty on it




The plans is for the floor to be sprayed the same colour as the car

Its also been sprayed with stone chip protection cant be to careful when it comes to the likes of this
Reply
Old Nov 25, 2010 | 03:50 PM
  #31  
coswurv's Avatar
coswurv
PassionFord Post Troll
15 Year Member
Liked
iTrader: (8)
 
Joined: Dec 2006
Posts: 3,478
Likes: 3
From: oxford
Default

That blaster must of been some tool by the look of the pipe, keep up the good work.
Reply
Old Nov 25, 2010 | 07:11 PM
  #32  
cossie09's Avatar
cossie09
PassionFord Regular
iTrader: (2)
 
Joined: Apr 2009
Posts: 462
Likes: 7
From: northern ireland
Default

Originally Posted by coswurv
That blaster must of been some tool by the look of the pipe, keep up the good work.
it was mate,covered 25 sierras over 50m away with black grit(what you say ghia 4x4) the car is in very good nick ,
Reply
Old Nov 25, 2010 | 10:58 PM
  #33  
adie_mwell's Avatar
adie_mwell
Regular Contributor
 
Joined: Mar 2007
Posts: 216
Likes: 0
From: Motherwell , Scotland
Default

same blater as i use and helmet looks like a clemco pot i see you didnt stip the front that well that because of the rubber underseal ud have been better to scrape that or burn it first then the blaster would of riped that off
Reply
Old Nov 25, 2010 | 11:18 PM
  #34  
-beefy-'s Avatar
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
Joined: Sep 2005
Posts: 10,072
Likes: 3
From: cleveland rsoc
Default

Originally Posted by ghia4x4
Cheers beefy yeah she is a solid we motor i was pleased with her when i got her but as every1 knows they always like to do things to make it better to compete with other cars at shows lol

Ill be posting pics of step by step of my build provided the thread does not get spammed again as i had to close my last 1 due to it bein spammed

Hav u any projects ongoing urself mate????


yeah mate , currently building a series 1 cossie powerd escort , usually found at the top of the resto section at the mo also cover in the fast fleet section of fast ford magazine

heres the link

https://passionford.com/forum/restor...y-pg-46-a.html

its a long read though but you get the idea from bout pg 38 onwards lol


your in ballymena ......


my girlfriends family are from belmullet out past sligo , never know i may swing by on my was down when its finsihed lol


looking good so far fella
Reply
Old Nov 26, 2010 | 08:17 PM
  #35  
ghia4x4's Avatar
ghia4x4
Thread Starter
Part of the Furniture
 
Joined: Apr 2009
Posts: 186
Likes: 0
From: ballymena
Default

After the success of the blasting the car i got the back end blasted and painted to the colour of my choice (Or which i thought was ok as the pics shows)






Originally Posted by -beefy-
yeah mate , currently building a series 1 cossie powerd escort , usually found at the top of the resto section at the mo also cover in the fast fleet section of fast ford magazine

heres the link

https://passionford.com/forum/restor...y-pg-46-a.html

its a long read though but you get the idea from bout pg 38 onwards lol


your in ballymena ......


my girlfriends family are from belmullet out past sligo , never know i may swing by on my was down when its finsihed lol


looking good so far fella
Mate as said in the pm by all means call up would love to meet folk from the site

Would any english members be interested in coming over for the causeway ford fair in 2011 its the ni equivilent of the ford fair

Last edited by ghia4x4; Nov 26, 2010 at 08:32 PM.
Reply
Old Nov 26, 2010 | 08:43 PM
  #36  
-beefy-'s Avatar
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
Joined: Sep 2005
Posts: 10,072
Likes: 3
From: cleveland rsoc
Default

you know the date yet mate and loaction ,

may be able to kill two birds with one stone ,


ohh forgot to mention her mums sides from pomeroy tyrone ,


think thats closer to you aint it stu ?
Reply
Old Nov 26, 2010 | 08:51 PM
  #37  
cossie09's Avatar
cossie09
PassionFord Regular
iTrader: (2)
 
Joined: Apr 2009
Posts: 462
Likes: 7
From: northern ireland
Default

Originally Posted by -beefy-
you know the date yet mate and loaction ,

may be able to kill two birds with one stone ,


ohh forgot to mention her mums sides from pomeroy tyrone ,


think thats closer to you aint it stu ?
beefy,its in june in portrush ,pomeroy is about 17miles from stu
Reply
Old Nov 26, 2010 | 09:10 PM
  #38  
-beefy-'s Avatar
-beefy-
formerly beefy-rst-2
iTrader: (6)
 
Joined: Sep 2005
Posts: 10,072
Likes: 3
From: cleveland rsoc
Default

ahh ill have to see then mate ,



got something kinda big coming up next june , that no matter what i wont be able to get out of lol


cant say atm ,


but id deffo be up for it the year after

my car may even be built by then lol
Reply
Old Nov 26, 2010 | 09:34 PM
  #39  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

i think it looked better with the black beam stewart
Reply
Old Nov 26, 2010 | 09:35 PM
  #40  
tjRS500's Avatar
tjRS500
.
 
Joined: Aug 2009
Posts: 1,368
Likes: 2
From: Co. Derry N.I
Default

a pic i took of under her aswell lad


Reply



All times are GMT. The time now is 05:38 AM.