Mercury grey 90 spec escort rs turbo NOW BREAKING!
Mercury grey 90 spec escort rs turbo NOW BREAKING!
Promised myself after the pickup project id never buy another but hey ho here we go again!! bought off a local guy for £850. comes with 25k of receipts and a big spec! was meant to be in fast ford back in 2004 at some point if someone remembers?
Last edited by bigryrs; Oct 17, 2010 at 06:45 PM.
Plans so far is to do some welding to it and prep it for an mot!! then get rid of the wheels for oz super t's or 17" fordy soft spokes and thats about it for now but ive been known to go a bit mental with spending on escorts lol
Trending Topics
http://www.pistonheads.com/sales/1672956.htm
you could have had pickup back as its back up for sale wish i had the cash for it lol
you could have had pickup back as its back up for sale wish i had the cash for it lol
burton power steel bottom end, 7-6-1 balanced steel crank and rods, burton stage 3 head piper cam stage 3 turbo 48 housing etc, was set up by MADevelopments, serious bit of kit there rye
nice car i like,you could break it for more than that lol
was in oct 2004 pf
http://www.pistonheads.com/sales/1672956.htm
you could have had pickup back as its back up for sale wish i had the cash for it lol
you could have had pickup back as its back up for sale wish i had the cash for it lol
correct
burton power steel bottom end, 7-6-1 balanced steel crank and rods, burton stage 3 head piper cam stage 3 turbo 48 housing etc, was set up by MADevelopments, serious bit of kit there rye
nice car i like,you could break it for more than that lol
was in oct 2004 pf
burton power steel bottom end, 7-6-1 balanced steel crank and rods, burton stage 3 head piper cam stage 3 turbo 48 housing etc, was set up by MADevelopments, serious bit of kit there rye
nice car i like,you could break it for more than that lol
was in oct 2004 pf
Well i sourced a 2004 performance ford mag and hey presto the cars in it!!
Spec in mag and probably not changed much
1600 cvh, bored short block by burton power,burton all steel bottom end,low comp accralite forged pistons(7.6.1), lightened,balanced steel crank and h section rods,double dowel crank and wire wringed block, burton stg 3 ported and polished head,piper 285 t2 camshaft with vernier pulley, burton head gasket,stg 3 hybrid turbo, 0.48 housing, -34 actuator, ahmed bayjoo chip,pace intercooler,k&n filter,high pressure burton oil pump,peaks 23 psi holds 22 psi, set up by MA developments.
Spec in mag and probably not changed much
1600 cvh, bored short block by burton power,burton all steel bottom end,low comp accralite forged pistons(7.6.1), lightened,balanced steel crank and h section rods,double dowel crank and wire wringed block, burton stg 3 ported and polished head,piper 285 t2 camshaft with vernier pulley, burton head gasket,stg 3 hybrid turbo, 0.48 housing, -34 actuator, ahmed bayjoo chip,pace intercooler,k&n filter,high pressure burton oil pump,peaks 23 psi holds 22 psi, set up by MA developments.
Last edited by bigryrs; Jun 4, 2010 at 07:19 PM.
UPDATE
Got my pug finished and out the garage so moved the escort today and bought some 17" diamond cuts last night!!
Started some welding today so its going ok for now!
Welding wont take long but ive got the battery tray to do which i aint done before so that should be interesting!!
Started some welding today so its going ok for now!
Welding wont take long but ive got the battery tray to do which i aint done before so that should be interesting!!
Virgin
Joined: Feb 2006
Posts: 1
Likes: 0
Nice car Ryan!!!!!!!!!!!!!!, bargain of the week... Hope you have plenty of gas and wire for the MIG welder. I have a old wing from a Bora if you need to make patches for the floor.
Joking aside, it is a good project car, those front brakes big enough??, you may need them to stop the car with all the extra plates you have welded!!!!!!!!!!!!!!!!!
cheeRs'
Steve.
Joking aside, it is a good project car, those front brakes big enough??, you may need them to stop the car with all the extra plates you have welded!!!!!!!!!!!!!!!!!
cheeRs'
Steve.
Bloody hells fire, how on earth did you get such bargains lol, nice one mate.
oh yeah the other day i remembered last year i never did send you payment for a clear cambelt cover you had for sale. Probably forgot as i shelved my series2 project for 7months and it sat under a sheet in my garage. Dont suppose by any chance you still have it do you?
oh yeah the other day i remembered last year i never did send you payment for a clear cambelt cover you had for sale. Probably forgot as i shelved my series2 project for 7months and it sat under a sheet in my garage. Dont suppose by any chance you still have it do you?
Nice car Ryan!!!!!!!!!!!!!!, bargain of the week... Hope you have plenty of gas and wire for the MIG welder. I have a old wing from a Bora if you need to make patches for the floor.
Joking aside, it is a good project car, those front brakes big enough??, you may need them to stop the car with all the extra plates you have welded!!!!!!!!!!!!!!!!!
cheeRs'
Steve.
Joking aside, it is a good project car, those front brakes big enough??, you may need them to stop the car with all the extra plates you have welded!!!!!!!!!!!!!!!!!
cheeRs'
Steve.
Bloody hells fire, how on earth did you get such bargains lol, nice one mate.
oh yeah the other day i remembered last year i never did send you payment for a clear cambelt cover you had for sale. Probably forgot as i shelved my series2 project for 7months and it sat under a sheet in my garage. Dont suppose by any chance you still have it do you?
oh yeah the other day i remembered last year i never did send you payment for a clear cambelt cover you had for sale. Probably forgot as i shelved my series2 project for 7months and it sat under a sheet in my garage. Dont suppose by any chance you still have it do you?
