*saff cosworth 4wd resto*small update 29/4/10
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
some of you may know i started this resto around 5 years ago now but do to moving away and a few house changes the car was at the bottom of a very long list.... all the pictures i had of it before are unfortunately lost now which is a shame but thats life... ill update as i can but here is how she stands now... not bad considering she has been sat in a cold garage for 5 years.... ive been doing a few little bits on the car at weekends as you can see but i hope to see a lot more progress in the next few months
thanks gaz






thanks gaz






Last edited by RSGARETHW; Apr 29, 2010 at 04:25 PM. Reason: wrong title
Trending Topics
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
not much been done recently as i have been working some long hours... got some more parts powder coated...


got my 300mm rear brakes off tony''nutsrus''

trial fitted one of my new wheels to see how it would look

got my new tyres fitted tonight onto new wheels that i got off martin hadland
8x18 et35 comp mo's with toyo proxes

and finally got my front brakes to fit now... ap 355mm 6 pots

engine will be coming out saturday for a bufty up so hopefull should start to see some progress now


got my 300mm rear brakes off tony''nutsrus''


trial fitted one of my new wheels to see how it would look

got my new tyres fitted tonight onto new wheels that i got off martin hadland
8x18 et35 comp mo's with toyo proxes
and finally got my front brakes to fit now... ap 355mm 6 pots

engine will be coming out saturday for a bufty up so hopefull should start to see some progress now
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
first off i must say a massive thanks to daveandhelenturbo off this board... dave did around a 200 mile round trip today to help me take the engine out and get the car looking cleanish again... she had her first wash in 5 years
... a massive thanks dave

the car is it stands today before it had a wash

the car after a quick wash and polish




engine out of the car again for the 3rd time
this should be at martin hadlands within the next week or so


and finally back in the garage again ready for all the front end to be re-fitted and all clean again


more updates to follow shortly....thanks gaz
... a massive thanks dave

the car is it stands today before it had a wash

the car after a quick wash and polish




engine out of the car again for the 3rd time
this should be at martin hadlands within the next week or so

and finally back in the garage again ready for all the front end to be re-fitted and all clean again


more updates to follow shortly....thanks gaz
Too many posts.. I need a life!!
iTrader: (1)
Joined: Feb 2008
Posts: 524
Likes: 5
From: Tonbridge, Kent
gaz you know when you need a hand im always there mate, think i owe you a big thanks for the pizza and drinks oh and all the other items i seemed to find im my car! see you again in a few weeks to rebuild the front end and finish the other bits off.
the car is a credit to you, cant wait to have a drive, and see a certain clio owners face when it drives out for the first time!!!!
again well done and a big credit to you gaz.
dave
the car is a credit to you, cant wait to have a drive, and see a certain clio owners face when it drives out for the first time!!!!
again well done and a big credit to you gaz.
dave
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
suppose i had better do a little update then 
well its been a busy year since i last did out with the car, been fitting kitchens, finishing the house off, getting married!!
and all sorts of things so the car really has been put on the back burner for a long while..
but there has been a bit of progress in the last couple of weeks and i really really want her finished for the end of this year so fingers crossed..
The new pictures arent the best as they were took on my phone, but im sure u get the idea... engine will be going back in on the 16th which is a relief, and then its just a matter of connecting most stuff back up and having a large bank balance..
ive tried to buy most things new where needed, and recon'd some things, but all ive set out to achieve 5 years ago is a clean car, nothing else.. definately no bufty show thing.. and when it is done im about 65% sure it will be being sold
but well see
anyway a few pictures me thinks.. ill try to keep this updated the best i can but i dont get that much time to work on it
cheers gaz
engine before

engine half way through, excuse pulleys these will be being changed

rocker cover is away at the moment for machining and the engine is almost complete now so ill take another picture when its complete
piccy of inlet manifold, had this powder coated but it had to be done twice, reason being first with the base colour then i had a metalic put into it, sure youll understand
looks really classy in person

i also had the cradle done in this colour as well, with new reyland engine mounts

steering rack cleaned up after about 2 hours work, my god this thing was shitty, never seen out like it, it was absolutely baked in crap

bit of paint later

and a bit more

and finally back on the cradle

think that will do for tonight, just waiting on bits to arrive now but ill update soon as i can..
oh yeah and ign bracket and map sensor bracket painted up also

got to fit new power steering tank in car plus lots of other little bits.. but its getting there............ slowly


bring on the digs from tiff and davecos4x4

well its been a busy year since i last did out with the car, been fitting kitchens, finishing the house off, getting married!!
and all sorts of things so the car really has been put on the back burner for a long while.. but there has been a bit of progress in the last couple of weeks and i really really want her finished for the end of this year so fingers crossed..
The new pictures arent the best as they were took on my phone, but im sure u get the idea... engine will be going back in on the 16th which is a relief, and then its just a matter of connecting most stuff back up and having a large bank balance..
ive tried to buy most things new where needed, and recon'd some things, but all ive set out to achieve 5 years ago is a clean car, nothing else.. definately no bufty show thing.. and when it is done im about 65% sure it will be being sold
but well see
anyway a few pictures me thinks.. ill try to keep this updated the best i can but i dont get that much time to work on it
cheers gaz
engine before

engine half way through, excuse pulleys these will be being changed

rocker cover is away at the moment for machining and the engine is almost complete now so ill take another picture when its complete
piccy of inlet manifold, had this powder coated but it had to be done twice, reason being first with the base colour then i had a metalic put into it, sure youll understand
looks really classy in person

i also had the cradle done in this colour as well, with new reyland engine mounts

steering rack cleaned up after about 2 hours work, my god this thing was shitty, never seen out like it, it was absolutely baked in crap

bit of paint later

and a bit more

and finally back on the cradle

think that will do for tonight, just waiting on bits to arrive now but ill update soon as i can..
oh yeah and ign bracket and map sensor bracket painted up also

got to fit new power steering tank in car plus lots of other little bits.. but its getting there............ slowly


bring on the digs from tiff and davecos4x4
Thread Starter
always working
iTrader: (3)
Joined: Mar 2009
Posts: 1,212
Likes: 6
From: warwickshire
the engine was took apart. new wrc gasket, new head bolts,, pretty much every new sensor u can get including new iscv.. 4wd manifold back on instead of 2wd.. turbo is a t34.55 but u will see all this when i get the cover back and bolt it down then i will take final pics.. alt brackets all powder coated as well.. pretty much a new engine
car looks a bit different to how it looks on this pic, i must take some newer ones

got new tanks as well, full boost,water and ancillary hoses as well.. all new fuel lines, clips, u name it ive aquired it
.. u dont realise just how much u will have to shell out on a resto till u start, believe me its frightening ...
car looks a bit different to how it looks on this pic, i must take some newer ones

got new tanks as well, full boost,water and ancillary hoses as well.. all new fuel lines, clips, u name it ive aquired it
.. u dont realise just how much u will have to shell out on a resto till u start, believe me its frightening ...








