hi there .. the focus is being sold as standard so have the mods off it //

all from a mk1 1.8

so first of all have a milltek cat back . Sounds bloody billiant .. use to have a scorpion on there . and this is seriously so much better... not to loud so doesnt wake the neighbours . nice rumble on idle .. but give it some welly and you know you have it , then drop a few gears on overrun and you get a few pops and bangs ! ... im going milltek on all of my future cars now .!





is in good condiiton few scrathes as you would excpect .. but all in all looks very good from the back looks loads better than having a backbox !

am after 200 for this .. can also post it if needed !

next up

have a piper 4-2-1 decat manifold .. this coupled with any decent system is in my opion the best mod you can do ! after adding this i noticed the most diffrence out of any of my mods and you realise just how restrictive the std cat is ! ,

very good condition , a slight dink on the bootom but doesnt effect in any way !






after 170 for this and again can post ..

would do the milltek plus the piper for 350 ..


have a cfm 65mm throttle body once again a fantastic mod to do .
doesnt come with gasket unfortunatly as it was just not worth reusing .. you can use some gasket paper can get from a decent car supplies .. also use some silicone gasket .. ! is a bit of sealent reesidue on the bottom



after 135 posted for this


all parts will be cleaned to the best of my ability before sending

 

dont suppose you still have the milltek exhast for sale