Zetaboostboy522bhp area six car and parts for sale**look**
Thread Starter
Advanced PassionFord User
Joined: Dec 2008
Posts: 2,158
Likes: 119
From: in reality!!!!!!!!!!!
Zetaboostboy522bhp area six car and parts for sale**look**
AREA SIX MK3.5 FIESTA RALLY BODYSHELL
HI , AS IAM NOW STARTING MY NEW PROJECT I HAVE MY OLD CAR BODYSHELL FOR SALE.THE CAR BODYSHELL IS A 1.6SI MK3.5 WHICH HAS THE EXTRA STRENGTHING IE SIDE IMPACT BARS ETC.THE BODYSHELL ITSELF IS IN GOOD CONDITION BUT THERE ARE A FEW RUST HOLES , 1 AROUND THE FILLER CAP, 1 IN THE LOWER REAR BACK BUMPER PANEL, AND BOTH SILLS. THERE IS A HOLE WHERE THE SILL MEETS THE FLOOR PAN ON THE DRIVERS SIDE. I KNOW THIS SOUNDS BAD BUT LOOK AT THE PICS AS ANY COMPETENT WELDER/BODYSHOP CAN SORT THIS. THE BODYSHELL IS FULLY STRIPPED AND HAS HAD A CUSTOM CAGES ROLLCAGE FITTED, COST OF THE ROLLCAGE WAS £750 AND JUST NEEDS THE ROOF CROSS TO FINISH.
.
ALSO INCLUDED IN THE SALE:
A FIBRESPORTS COSSIE STYLE FRONT BUMPER AT A COST OF £280
A GENUINE FORD SI REAR BUMPER WITH CENTRE EXHAUST CUTOUT
X2 FIESTA BONNETS WITH SIERRA 4X4 COSWORTH VENT CUTOUTS
X1 PAIR OF GENUINE COSWORTH 4X4 VENTS AT A COST OF £140
FIBRESPORTS SIDESKIRTS AND WHEEL ARCHES AT A COST OF £110
GENUINE FORD TAILGATE WITH ECOSSE ROOF SPOILER AT A COST OF£380
X2 GENUINE FORD DOORS
THIS CAR WAS RUNNING A 2.1 AREA SIX FULL BLOWN ZETEC TURBO ENGINE RUNNING 300BHP AND WAS A VERY GOOD CAR BUT THINGS HAVE TO MOVE ON AND IVE GOOD MY MK6 BODYSHELL SO IT MUST GO AS I NEED THE ROOM. I HAVE ADDED SOME PHOTOS OF WHAT THE CAR LOOKED LIKE BEFORE I STRIPPED IT DOWN , AND WHEN STRIPPED DOWN PLUS THE RUSTY BITS.
£750ovno
THANKS FOR LOOKIN
OTHER PARTS FOR SALE
AREA SIX EXHAUST MANIFOLD
AREA SIX EXHAUST MANIFOLD BUT THIS WAS BUILT BY MYSELF AND HAS EQUAL LENGHT HEADERS WHICH TOOK ALONG TIME TO GET RIGHT .THIS IS OVER THE GEARBOX TYPE MANIFOLD AND NEEDS FINISHING IE END PIPE AND TURBO PLATE . THIS WILL BE FINISHED TO SOMEONES SPEC IE WHAT TURBO THERE RUNNING ALSO WITH EXTERNAL WASTEGATE PIPE.
MY NEW ENGINE MADE 522BHP AND 395 LB/FT ON THE DYNO USING A AREA SIX UN EQUAL LENGHT MANIFOLD SO I BUILT THIS TO TRY AND GET THE TORQUE FIGURE UP BUT NOW IAM GOING 4X4 SO IT IS NO LONGER NEEDED.
FINISHED PRICE £500 NO OFFERS
AREA SIX MODIFIED CVH FLYWHEEL
MODIFIED CVH FLYWHEEL TO FIT ON THE ZETEC ENGINE, THIS WAS USED BECAUSE THERE IS ALOT BIGGER RANGE OF OFF THE SHELF UPRATED CLUTCHES FOR THE FIESTA TURBO
£50
AREA SIX ZETEC TURBO BOOST PIPE USING A RS1800 INLET AND PRO ALLOY LARGE FRONT MOUNTED INTERCOOLER
ZETEC TURBO BOOST HOSE WHICH CROSSES OVER THE CAM COVER AND DOWN PAST THE COIL PACK. QUALITY ITEM AND LOOKS THE DOGS
£75 NO OFFERS
FORD FOCUS ST170 GEARBOX LOW MILEAGE 17,000 FOR SALE
LOW MILEAGE ST170 GEARBOX. THE PERSON WHO I BROUGHT THIS OFF HAD A COMPLETE ST170 RIGHTOFF AND WAS USING THE ENGINE FOR A KIT CAR THATS WHY HE DIDNT WANT THE GEARBOX. HE SHOWED ME THE CLOCKS AND MOT TO PROVE THE MILEAGE. THIS HAS NEVER BEEN USED SINCE I BROUGHT IT AND NOW IAM GOING 4X4 I DONT NEED IT ANYMORE.THIS COST ME £450 TO BUY.
£300 NO OFFERS
HI , AS IAM NOW STARTING MY NEW PROJECT I HAVE MY OLD CAR BODYSHELL FOR SALE.THE CAR BODYSHELL IS A 1.6SI MK3.5 WHICH HAS THE EXTRA STRENGTHING IE SIDE IMPACT BARS ETC.THE BODYSHELL ITSELF IS IN GOOD CONDITION BUT THERE ARE A FEW RUST HOLES , 1 AROUND THE FILLER CAP, 1 IN THE LOWER REAR BACK BUMPER PANEL, AND BOTH SILLS. THERE IS A HOLE WHERE THE SILL MEETS THE FLOOR PAN ON THE DRIVERS SIDE. I KNOW THIS SOUNDS BAD BUT LOOK AT THE PICS AS ANY COMPETENT WELDER/BODYSHOP CAN SORT THIS. THE BODYSHELL IS FULLY STRIPPED AND HAS HAD A CUSTOM CAGES ROLLCAGE FITTED, COST OF THE ROLLCAGE WAS £750 AND JUST NEEDS THE ROOF CROSS TO FINISH.
.
ALSO INCLUDED IN THE SALE:
A FIBRESPORTS COSSIE STYLE FRONT BUMPER AT A COST OF £280
A GENUINE FORD SI REAR BUMPER WITH CENTRE EXHAUST CUTOUT
X2 FIESTA BONNETS WITH SIERRA 4X4 COSWORTH VENT CUTOUTS
X1 PAIR OF GENUINE COSWORTH 4X4 VENTS AT A COST OF £140
FIBRESPORTS SIDESKIRTS AND WHEEL ARCHES AT A COST OF £110
GENUINE FORD TAILGATE WITH ECOSSE ROOF SPOILER AT A COST OF£380
X2 GENUINE FORD DOORS
THIS CAR WAS RUNNING A 2.1 AREA SIX FULL BLOWN ZETEC TURBO ENGINE RUNNING 300BHP AND WAS A VERY GOOD CAR BUT THINGS HAVE TO MOVE ON AND IVE GOOD MY MK6 BODYSHELL SO IT MUST GO AS I NEED THE ROOM. I HAVE ADDED SOME PHOTOS OF WHAT THE CAR LOOKED LIKE BEFORE I STRIPPED IT DOWN , AND WHEN STRIPPED DOWN PLUS THE RUSTY BITS.
£750ovno
THANKS FOR LOOKIN
OTHER PARTS FOR SALE
AREA SIX EXHAUST MANIFOLD
AREA SIX EXHAUST MANIFOLD BUT THIS WAS BUILT BY MYSELF AND HAS EQUAL LENGHT HEADERS WHICH TOOK ALONG TIME TO GET RIGHT .THIS IS OVER THE GEARBOX TYPE MANIFOLD AND NEEDS FINISHING IE END PIPE AND TURBO PLATE . THIS WILL BE FINISHED TO SOMEONES SPEC IE WHAT TURBO THERE RUNNING ALSO WITH EXTERNAL WASTEGATE PIPE.
MY NEW ENGINE MADE 522BHP AND 395 LB/FT ON THE DYNO USING A AREA SIX UN EQUAL LENGHT MANIFOLD SO I BUILT THIS TO TRY AND GET THE TORQUE FIGURE UP BUT NOW IAM GOING 4X4 SO IT IS NO LONGER NEEDED.
FINISHED PRICE £500 NO OFFERS
AREA SIX MODIFIED CVH FLYWHEEL
MODIFIED CVH FLYWHEEL TO FIT ON THE ZETEC ENGINE, THIS WAS USED BECAUSE THERE IS ALOT BIGGER RANGE OF OFF THE SHELF UPRATED CLUTCHES FOR THE FIESTA TURBO
£50
AREA SIX ZETEC TURBO BOOST PIPE USING A RS1800 INLET AND PRO ALLOY LARGE FRONT MOUNTED INTERCOOLER
ZETEC TURBO BOOST HOSE WHICH CROSSES OVER THE CAM COVER AND DOWN PAST THE COIL PACK. QUALITY ITEM AND LOOKS THE DOGS
£75 NO OFFERS
FORD FOCUS ST170 GEARBOX LOW MILEAGE 17,000 FOR SALE
LOW MILEAGE ST170 GEARBOX. THE PERSON WHO I BROUGHT THIS OFF HAD A COMPLETE ST170 RIGHTOFF AND WAS USING THE ENGINE FOR A KIT CAR THATS WHY HE DIDNT WANT THE GEARBOX. HE SHOWED ME THE CLOCKS AND MOT TO PROVE THE MILEAGE. THIS HAS NEVER BEEN USED SINCE I BROUGHT IT AND NOW IAM GOING 4X4 I DONT NEED IT ANYMORE.THIS COST ME £450 TO BUY.
£300 NO OFFERS
Last edited by zetaboostboy522bhp; Jan 10, 2009 at 10:52 PM.
Thread Starter
Advanced PassionFord User
Joined: Dec 2008
Posts: 2,158
Likes: 119
From: in reality!!!!!!!!!!!
Hey up mate everythings ok my end , cars finally got goin and will hopefully be done by the end of the year. Hows yours come on , is it on the road yet , and are you still goin down the twin turbo route????????????????????????????????? Keep posting nice to hear from you
Trending Topics
all good here mate
i sold the black 3dr, bought a saph, spent a load on that sold it, and just bought another 3dr shell of dan at rapidford off here just gathering a load o bits together ready to stick it together!!!!
come up and have a look anytime
i sold the black 3dr, bought a saph, spent a load on that sold it, and just bought another 3dr shell of dan at rapidford off here just gathering a load o bits together ready to stick it together!!!!
come up and have a look anytime
Thread Starter
Advanced PassionFord User
Joined: Dec 2008
Posts: 2,158
Likes: 119
From: in reality!!!!!!!!!!!
