RED URM S2 bufty clean up *23/11 purchases*
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
Heres my s2 that I got April last year



59k miles
Chipped to 12 psi
-31 actuator
Piper Cams
Magnex system
Piper Air cone
Pace Double Capacity Intercooler
Konis
Added some sounds

I cleaned and polished it like a proper bufty and at my first show I got best old school

I was really surprised and quite chuffed
some more random pics


First change I actually did was a radtec front mount intercooler


My mechanic was a bit rough



Much beter



59k miles
Chipped to 12 psi
-31 actuator
Piper Cams
Magnex system
Piper Air cone
Pace Double Capacity Intercooler
Konis
Added some sounds

I cleaned and polished it like a proper bufty and at my first show I got best old school


I was really surprised and quite chuffed

some more random pics


First change I actually did was a radtec front mount intercooler


My mechanic was a bit rough




Much beter
Last edited by roro22; Nov 23, 2008 at 06:24 PM.
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
I had to lose the spot's as they didn't fit with the intercooler but I might put them back on for next year
Bought some 17" khans to refurb and put on the car


But after a nitromors in the eye accident I got pissed off and sold them
Next up was a r/r day for the WOS RSOC where it made 155 at the wheels
but it went well for the spec

I've got a vid of it on the rollers but youtube aint working for me
Bought some 17" khans to refurb and put on the car


But after a nitromors in the eye accident I got pissed off and sold them
Next up was a r/r day for the WOS RSOC where it made 155 at the wheels
but it went well for the spec
I've got a vid of it on the rollers but youtube aint working for me
Last edited by roro22; Nov 11, 2008 at 09:15 PM.
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
I even had my first trackday that has really got me wanting to do more!

Next up I bought a Group A coil and some opening rear quarters from some top guys on the WOS site

Group A coil in place


Nice rear quarters!
Now comes the hard bit!

Next up I bought a Group A coil and some opening rear quarters from some top guys on the WOS site

Group A coil in place


Nice rear quarters!
Now comes the hard bit!
Last edited by roro22; Nov 11, 2008 at 09:29 PM.
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
The clean up!
I want to get her mint underneath and this is where I am so far
Crappy pics from my misses phone!
Got my container sorted and jacked her up

After a wee bit of cleaning I tried out some smooth hammerite on the tow eye

Random bit

My car has been butchered with a towbar at some point so I removed the plugs and some metal plate to see what was hiding........... nothing
I attacked the pump carrier next



Not so good!
Caught it before it gets through to the floor though so I'm happy


It will clean up fine
I found the hammerite I put on was a bit soft

After speaking to TWINS
I'm gonna stone chip it then hammerite it so its gonna be a long winter but I think it will be worth it
A polished pump carrier will be on order too
I hope I can do as good a job as some of the boys on here
I want to get her mint underneath and this is where I am so far
Crappy pics from my misses phone!Got my container sorted and jacked her up

After a wee bit of cleaning I tried out some smooth hammerite on the tow eye

Random bit

My car has been butchered with a towbar at some point so I removed the plugs and some metal plate to see what was hiding........... nothing
I attacked the pump carrier next



Not so good!
Caught it before it gets through to the floor though so I'm happy


It will clean up fine

I found the hammerite I put on was a bit soft

After speaking to TWINS
I'm gonna stone chip it then hammerite it so its gonna be a long winter but I think it will be worth itA polished pump carrier will be on order too
I hope I can do as good a job as some of the boys on here
Last edited by roro22; Nov 11, 2008 at 09:19 PM.
Trending Topics
have u managed to fit the fans in between the rad and the cooler with the radtec mate?
looks like it from the front pic. any chance of a pic of how u spaced it out, cos the brackets as standard force u to fit the fans out front, n i dnt like that, mine ran too hot with it like it lol
looks like it from the front pic. any chance of a pic of how u spaced it out, cos the brackets as standard force u to fit the fans out front, n i dnt like that, mine ran too hot with it like it lol
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
Rear Arch off last night 
Oh the horrors!

not really, bit of rust at the bottom I'm going to treat but no holes

Cleaned up

Inside the arch where I've been cleaning like mad

Its a very very slow process but I am adament not to take off any paint that doesn't need to come off
Back up at the car tomorrow

Oh the horrors!

not really, bit of rust at the bottom I'm going to treat but no holes

Cleaned up

Inside the arch where I've been cleaning like mad


Its a very very slow process but I am adament not to take off any paint that doesn't need to come off
Back up at the car tomorrow
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
Got my airbox today, I really hate my piper cone
Long story but its the original box off the car

I'm waiting to hear back from Ford if they got the fittings to put it back on
Was up at the car yesterday, more cleaning and took the offside skirt off. Minty minty sills cheered me up after scratching an alloy
Took a day off tonight from the car to get some time with the misses lol
Long story but its the original box off the car

I'm waiting to hear back from Ford if they got the fittings to put it back on
Was up at the car yesterday, more cleaning and took the offside skirt off. Minty minty sills cheered me up after scratching an alloy
Took a day off tonight from the car to get some time with the misses lol
Thread Starter
I've found that life I needed.. It's HERE!!
Joined: Feb 2007
Posts: 1,002
Likes: 0
From: argyll
Up at the car again today
Not done much took the nearside arch off and it needs some work but I knew that so no nasty surprises
I cheered myself up by paying for some new bits
Orion Ghia carpeted door pockets

and some beter nick interior door pulls will be on there way too, mine are a bit flakey

Got a Tim turbo boost gauge in the boot to fit as well once I figure out where the holders going
Getting a spare seat pan off ebay for when I set in about the seats too
MOST important I got the good book, haynes manual! thank god I might be able to progess beter now
Pics to follow
Not done much took the nearside arch off and it needs some work but I knew that so no nasty surprises

I cheered myself up by paying for some new bits

Orion Ghia carpeted door pockets

and some beter nick interior door pulls will be on there way too, mine are a bit flakey

Got a Tim turbo boost gauge in the boot to fit as well once I figure out where the holders going

Getting a spare seat pan off ebay for when I set in about the seats too
MOST important I got the good book, haynes manual! thank god I might be able to progess beter now
Pics to follow
Last edited by roro22; Nov 23, 2008 at 06:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM



I was trying to find fans that fit behind but I think I may go for a grs next year anyway. My car runs cool enough with the interior fans on but its not a permanent fix 






