Ford RS Cosworth Parts for Sale Only RS Cosworth parts here please. Only Gold Members can sell parts!

Big spec 3 door ,breaking and other cosworth parts some picture added

Thread Tools
 
Search this Thread
 
Old Aug 16, 2008 | 01:02 PM
  #1  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default Big spec 3 door ,breaking and other cosworth parts some picture added

Due to extension coming up and a new business venture its time to release some of the money i have tied up in cars.
I will not get in to a public discussion about any of my prices ,so please keep your comment to yourselves ,i will be open to sensable offers on some parts.












Any more pictures required please ask the car has only done a couple of thousand miles since it was fully rebuilt so everything is mint

Rs 500 engine fully re built on standard bore ,standard grind crank everything balanced ,shot peened rods ,cosworth pistons standard comp ported polished head ,isky springs ,bd16s ect
8 greens ,freshly rebuilt proper 4 (with reciept) big wing sump with mountune baffle
£8k

shell sold

L8 with super 8 board wrc style wiring loom 2 no ea chips and dash boost control
£1k
RS 500 Front bumper THIS IS IN MINT CONDITION complete with grills and orange indicators , the lower splitter is a replica
£1k prov sold

Group a coil overs converted to group n by A1 ralley sports full spec by pm 909 mag rears alloy body fronts
£ 1200


PRO ALLOY RS500 intercooler ,ally rad and turbo pre cooler including fans escort cos patern will split
£800

Twin 0044 pumps in craddle
£200

SECs monitor
£250 Prov sold

Rear spoiler
£200

Comp mos with good tyres could do with a refurb as they have a pearl finish 8j 17 et17 with proxy ts1 215 40 front 245 35 rears with good tread
£750

Ap 6pots with 330mm disks good pads and hoses
£900 available again

Front and rear seats very clean no holes or rips
£ 350

Full set of rs500 samcos in red
£200


Air injectors
£225

Full 3" Stainless system With 1 box
£150

A1 ralley sport adjustable tcas never fitted
£150 Prov sold


alloy header tank and swirl pot
£140

Escort cos/4x4 parts

Ap 6 paddle clutch with new cover and release bearing
£300


Alcon 4 pot calipers with brand new 330mm rotors, brackets and pads
£600

Esc cosworth side skirts complete in red ,will need painting
£200 prov sold

Esc cosworth front bumper complete with steel monting brakets, this has a crack on the top on one side (pm for pictures)should be an easy repair for a body shop
£250 sold

Bara box with uprated 1st gear and 60nm centre diff complete with 7 1/2" twin plate clutch with new plates and shim ,this will be availiable shortly as soon as it has been checked and rebuilt by bara.
£3k prov sold


4x4 rear coil overs avo good condition £130


1 front koni 2 fears complete with full set of ggr lowering springs shocks are very clean with only a small amount off use
£130
There are some more parts to come when i have been though my garage
Cheers Andy
Any questions please ask

Last edited by escossie560; Sep 3, 2008 at 05:29 AM. Reason: parts sold
Reply
Old Aug 16, 2008 | 05:33 PM
  #2  
jaimesdna's Avatar
jaimesdna
Advanced PassionFord User
iTrader: (3)
 
Joined: Dec 2004
Posts: 1,893
Likes: 1
From: great yarmouth
Default

pm sent
Reply
Old Aug 16, 2008 | 05:51 PM
  #3  
jaimesdna's Avatar
jaimesdna
Advanced PassionFord User
iTrader: (3)
 
Joined: Dec 2004
Posts: 1,893
Likes: 1
From: great yarmouth
Default

pm'd again
Reply
Old Aug 16, 2008 | 06:48 PM
  #4  
Cossie-Turbo's Avatar
Cossie-Turbo
15000
 
Joined: Aug 2005
Posts: 18
Likes: 0
From: Norway
Default

pm sent
Reply
Old Aug 16, 2008 | 07:33 PM
  #5  
wildheart's Avatar
wildheart
PassionFord Post Whore!!
iTrader: (4)
 
Joined: May 2003
Posts: 6,108
Likes: 10
From: Derbyshire
Default

Pic of the small turbo plenum cover please
Reply
Old Aug 17, 2008 | 07:53 AM
  #6  
RSCossieGaz's Avatar
RSCossieGaz
10K+ Poster!!
iTrader: (6)
 
Joined: May 2003
Posts: 11,659
Likes: 5
From: Middlesex AKA Planet earth!!!!
Default

price on strut brace please?
Reply
Old Aug 17, 2008 | 09:48 AM
  #7  
broadmoor's Avatar
broadmoor
Too many posts.. I need a life!!
 
Joined: May 2004
Posts: 678
Likes: 1
From: Essex
Default

pm sent
Reply
Old Aug 17, 2008 | 03:25 PM
  #8  
NEIL A's Avatar
NEIL A
PassionFord Post Whore!!
iTrader: (6)
 
Joined: Jun 2005
Posts: 5,297
Likes: 9
From: LEVEN , FIFE
Default

So tempted by the gearbox Does the double plate clutch need a center push or will normal hydraulic conversion do.
Reply
Old Aug 17, 2008 | 03:53 PM
  #9  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

requires a centre push but if you already have a hydraulic conversion you can still use the master cylinder ,gearbox also has a quaiffe cradle
Reply
Old Aug 17, 2008 | 06:51 PM
  #10  
RONNIE AMIS's Avatar
RONNIE AMIS
PassionFord Post Whore!!
iTrader: (17)
 
Joined: May 2004
Posts: 5,618
Likes: 0
Default

do you have an up rated rear diff mount?
Reply
Old Aug 17, 2008 | 06:54 PM
  #11  
RS LOZWORTH's Avatar
RS LOZWORTH
I've found that life I needed.. It's HERE!!
 
Joined: Dec 2006
Posts: 1,105
Likes: 0
From: Leicester
Default

ive seen this car and it is mint, worth every penny for all the parts!
Reply
Old Aug 17, 2008 | 07:40 PM
  #12  
FlashRS's Avatar
FlashRS
Too many posts.. I need a life!!
iTrader: (10)
 
Joined: Jun 2003
Posts: 740
Likes: 1
From: Aylesbury, Bucks
Default

Hi, does the Escort shell have any id? What colour is it.
Thanks
Reply
Old Aug 17, 2008 | 08:41 PM
  #13  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by FlashRS
Hi, does the Escort shell have any id? What colour is it.
Thanks
its red on a german id
Reply
Old Aug 18, 2008 | 01:40 PM
  #14  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

pm'ed
Reply
Old Aug 21, 2008 | 05:16 PM
  #15  
jaimesdna's Avatar
jaimesdna
Advanced PassionFord User
iTrader: (3)
 
Joined: Dec 2004
Posts: 1,893
Likes: 1
From: great yarmouth
Default

inlet recieved today with many thanx
Reply
Old Aug 21, 2008 | 08:38 PM
  #16  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by jaimesdna
inlet recieved today with many thanx
sorry it was a day later than intened i missed the couier ,glad you received it ok
Reply
Old Aug 21, 2008 | 08:45 PM
  #17  
Cragrat's Avatar
Cragrat
sit boo boo sit
15 Year Member
Liked
iTrader: (4)
 
Joined: Jun 2008
Posts: 8,006
Likes: 50
From: Location Location..
Default

pm sent

cheeRS daz
Reply
Old Aug 24, 2008 | 06:46 PM
  #18  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

How much for the headlineing
Reply
Old Aug 25, 2008 | 08:23 AM
  #19  
cossie604's Avatar
cossie604
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Apr 2005
Posts: 4,703
Likes: 2
From: Derby
Default

How much inc p&p to Derby for the breather pot (dont need the mirror image tank, just the pot that sit's above the exhaust front pipe) with or with out pipe work.

Cheers,
Stu.

EDIT: actualy ive just noticed your in Leicester...if your nto far from Shepshed then I could collect on any Sunday as im over that way visiting the rents.

Last edited by cossie604; Aug 28, 2008 at 09:21 PM.
Reply
Old Aug 25, 2008 | 11:23 AM
  #20  
broadmoor's Avatar
broadmoor
Too many posts.. I need a life!!
 
Joined: May 2004
Posts: 678
Likes: 1
From: Essex
Default

any news on the bits fella?
Reply
Old Aug 25, 2008 | 02:09 PM
  #21  
Sierra555's Avatar
Sierra555
Virgin
 
Joined: May 2008
Posts: 10
Likes: 0
Default

Hi there,just wondering if you still have the front bumper?I live in Ireland,would it be a problem to post?Maybe e-mail me on mapcrowley@yahoo.ie .(RSOC member)
Reply
Old Aug 28, 2008 | 07:50 AM
  #22  
cossie604's Avatar
cossie604
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Apr 2005
Posts: 4,703
Likes: 2
From: Derby
Default

Back to the top for your attention.
Reply
Old Aug 28, 2008 | 07:04 PM
  #23  
f6cus's Avatar
f6cus
Too many posts.. I need a life!!
iTrader: (3)
 
Joined: Sep 2007
Posts: 749
Likes: 0
From: wirral / nottingham
Default

pm sent
Reply
Old Aug 29, 2008 | 11:31 PM
  #24  
f6cus's Avatar
f6cus
Too many posts.. I need a life!!
iTrader: (3)
 
Joined: Sep 2007
Posts: 749
Likes: 0
From: wirral / nottingham
Default

did u get my pm mate
Reply
Old Aug 30, 2008 | 11:09 PM
  #25  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by ian550
did u get my pm mate

sorry no pm recieved yet
Reply
Old Aug 31, 2008 | 12:03 AM
  #26  
cossie604's Avatar
cossie604
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Apr 2005
Posts: 4,703
Likes: 2
From: Derby
Default

......and all the questions in this topic?
Reply
Old Aug 31, 2008 | 03:09 PM
  #27  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by cossie604
How much inc p&p to Derby for the breather pot (dont need the mirror image tank, just the pot that sit's above the exhaust front pipe) with or with out pipe work.

Cheers,
Stu.

EDIT: actualy ive just noticed your in Leicester...if your nto far from Shepshed then I could collect on any Sunday as im over that way visiting the rents.
Very sorry missed your question totally ,breather system is already spoken for ,that why i had not listed it
Reply
Old Aug 31, 2008 | 03:48 PM
  #28  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

Head lineing again?
Can you pm me a contact number
Reply
Old Aug 31, 2008 | 04:15 PM
  #29  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by Barry R
Head lineing again?
Can you pm me a contact number
Sorry head lining to go with the shell ,whats up with yours is it sagging? or have you not got one?

Last edited by escossie560; Aug 31, 2008 at 04:24 PM.
Reply
Old Aug 31, 2008 | 07:15 PM
  #30  
cossie604's Avatar
cossie604
PassionFord Post Whore!!
iTrader: (2)
 
Joined: Apr 2005
Posts: 4,703
Likes: 2
From: Derby
Default

lol sorry mate...my last post seemed rather harsh (please note time of post and that it was a pub night lol)

Ok no worries on the breather do-dar
Reply
Old Aug 31, 2008 | 07:51 PM
  #31  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

its sagging really bad and its so dirty its black in places
Reply
Old Aug 31, 2008 | 08:21 PM
  #32  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by Barry R
its sagging really bad and its so dirty its black in places
its quite easy to recover i can get you the fabric at a reasonable cost it takes about 2 hours in out and finished will cost tou £60 max ,i recovered the on in mine


before


during


after

and mine was a pain to get in and out due to the cage, give me a shout if you want some fabric i think it was about £50 ,i can check easily
Reply
Old Aug 31, 2008 | 08:23 PM
  #33  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by cossie604
lol sorry mate...my last post seemed rather harsh (please note time of post and that it was a pub night lol)

Ok no worries on the breather do-dar
no offence taken been trying to reply to every body but have missed a couple
Reply
Old Sep 2, 2008 | 09:51 PM
  #34  
broadmoor's Avatar
broadmoor
Too many posts.. I need a life!!
 
Joined: May 2004
Posts: 678
Likes: 1
From: Essex
Default

Nice to meet you Andy

Thanks alot fella
Reply
Old Sep 3, 2008 | 11:49 AM
  #35  
RobCarden's Avatar
RobCarden
358bhp
 
Joined: May 2003
Posts: 1,382
Likes: 1
From: watford, hertfordshire
Default

Originally Posted by escossie560
its quite easy to recover i can get you the fabric at a reasonable cost it takes about 2 hours in out and finished will cost tou £60 max ,i recovered the on in mine


before


during


after

and mine was a pain to get in and out due to the cage, give me a shout if you want some fabric i think it was about £50 ,i can check easily

that looks fantastic! mine sooooo needs doing.... can you still get the roof lining? i could really use it! cheers
Reply
Old Sep 4, 2008 | 05:01 PM
  #36  
AndyPen's Avatar
AndyPen
Advanced PassionFord User
iTrader: (24)
 
Joined: Jul 2006
Posts: 1,907
Likes: 20
Default

That headlining job looks amazing - any more info on who and how pls??

Sorry if its off topic - just flippin impressed!!
Reply
Old Sep 5, 2008 | 01:35 PM
  #37  
Barry R's Avatar
Barry R
PassionFord Post Troll
iTrader: (3)
 
Joined: May 2007
Posts: 3,334
Likes: 1
From: Bristol
Default

send me some details please
Reply
Old Sep 5, 2008 | 04:11 PM
  #38  
Sierra555's Avatar
Sierra555
Virgin
 
Joined: May 2008
Posts: 10
Likes: 0
Default RS5oo Front bumper.

Hi Andy,you have some mails waiting on that hotmail account regarding the parts for sale.CheeRS Marc.
Reply
Old Sep 6, 2008 | 08:51 PM
  #39  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by AndyPen
That headlining job looks amazing - any more info on who and how pls??

Sorry if its off topic - just flippin impressed!!

Me on the garden table , it was fairly straight forward by the way thanks
Reply
Old Sep 6, 2008 | 08:55 PM
  #40  
escossie560's Avatar
escossie560
Thread Starter
Too many posts.. I need a life!!
 
Joined: Nov 2005
Posts: 564
Likes: 0
From: leicester
Default

Originally Posted by RobCarden
that looks fantastic! mine sooooo needs doing.... can you still get the roof lining? i could really use it! cheers
can pop down this week ,must tell you its not ford fabric though its saab it the closest i could get,may be able to get a discount it a few people want the cloth
Reply



All times are GMT. The time now is 03:30 AM.