flocked interior esc cos
Thread Starter
PassionFord Post Troll
iTrader: (5)
Joined: May 2003
Posts: 3,002
Likes: 0
From: Dunstable (Junction 9 or 11 of the M1)
I'm gonna cage the car up so had to remove the interior didn't want it to have the ripped out look so thought I'd tidy it up a little.
Some bits I'm gonna redo.









Some bits I'm gonna redo.









Thread Starter
PassionFord Post Troll
iTrader: (5)
Joined: May 2003
Posts: 3,002
Likes: 0
From: Dunstable (Junction 9 or 11 of the M1)
cheers 
My last car was too noisy for a road car when it was stripped out and night time outings were cold, so I think this might make it a bit warmer and it looks better than the inside of the panels.
Got the door cards to do aswell as I've taken the door pockets off for the door bars when they are fitted.

My last car was too noisy for a road car when it was stripped out and night time outings were cold, so I think this might make it a bit warmer and it looks better than the inside of the panels.
Got the door cards to do aswell as I've taken the door pockets off for the door bars when they are fitted.
Trending Topics
Thread Starter
PassionFord Post Troll
iTrader: (5)
Joined: May 2003
Posts: 3,002
Likes: 0
From: Dunstable (Junction 9 or 11 of the M1)
Cheers mate
Its getting there
lots of flocking about

here's a doorcard that I done a test on the other day before I do the ones I'm going to use in the car.
They are a little bit harder becuase they are fabric and need more work than the dashes.



turned out okay, but I need to suspend the work to get teh edges and more lighting in the booth 2 9ft strip lamps 1 m off the desk aren't enough to be able to see the work. I'm gonna end up with a suntan and a half
Its getting there 

here's a doorcard that I done a test on the other day before I do the ones I'm going to use in the car.
They are a little bit harder becuase they are fabric and need more work than the dashes.



turned out okay, but I need to suspend the work to get teh edges and more lighting in the booth 2 9ft strip lamps 1 m off the desk aren't enough to be able to see the work. I'm gonna end up with a suntan and a half

Last edited by Dan@Rapid-Ford; Apr 3, 2008 at 06:31 PM.
Looking good Dan there is someone local to me setting up doing this justnow, if his work turns out half as good as yours i might get all interior plastics done black and dark grey.
Thread Starter
PassionFord Post Troll
iTrader: (5)
Joined: May 2003
Posts: 3,002
Likes: 0
From: Dunstable (Junction 9 or 11 of the M1)
We are just starting to do customers cars now and can do postage 
Thanks for the compliment
Thanks for the compliment
Last edited by Dan@Rapid-Ford; Apr 3, 2008 at 07:13 PM.
Thread Starter
PassionFord Post Troll
iTrader: (5)
Joined: May 2003
Posts: 3,002
Likes: 0
From: Dunstable (Junction 9 or 11 of the M1)
Depends what way you look at it. I'm selling my original door panels and replacing them with others, I've sold the interior and replaced that. The only bits that I have 'de-valued' (as you put it) are the common Escort parts. If it comes to selling the car, it can go in pieces as it is half way there


You should see what I am going to do for my next trick
You'll love it!BTW - did you know my car is converted to RWD?

Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM






