I want a VW!
Just been tempted by a nice looking black mk3 GTi.
It is a 2.0 8v, yes i know it wont set the road on fire before you say it but im getting bored and fancy a change after 2 years of owning this Escort.
Ive only seen pictures so far and it looks in good nick inside and out, what else should i look for and ask?
Im taking it for a spin tomorrow.
It is a 2.0 8v, yes i know it wont set the road on fire before you say it but im getting bored and fancy a change after 2 years of owning this Escort.
Ive only seen pictures so far and it looks in good nick inside and out, what else should i look for and ask?
Im taking it for a spin tomorrow.
yeah i know, just not really in the know with VW's so wasnt sure if their prone for anything, but obviously its a VW so there cant be much to look for mechanically.
Here it is, i think it looks quite nice?

The splitter is in the boot he said because its catching over speed bumps.
Got a CAT 1 alarm with full closure which is nice
Here it is, i think it looks quite nice?

The splitter is in the boot he said because its catching over speed bumps.
Got a CAT 1 alarm with full closure which is nice
ive got a vr6 and fuel economy isnt the best tbh, that looks good, audi a3 steels on it, tbh they dont have a lot of rust like fords
id check the idle on the 2.0 8v as theyre a bit of a bugger for erratic idling, my mk2 had the 2.0 8v engine in and it was up down up down all the time, bit annoying!!!!!
i want mine like this....


Sarah
id check the idle on the 2.0 8v as theyre a bit of a bugger for erratic idling, my mk2 had the 2.0 8v engine in and it was up down up down all the time, bit annoying!!!!!
i want mine like this....

Sarah
Trending Topics
Dicko the ad says 8v but if you look at my pic i swear thats a red 16v badge on the grill?? ill open the bonnet tomorrow when i go to see it and double check anyway.
So there audi a3 steels? i did wonder what they were yeah, looks good though, ive never been one for huge alloys since ive grown up abit, subtle is the way forward
So there audi a3 steels? i did wonder what they were yeah, looks good though, ive never been one for huge alloys since ive grown up abit, subtle is the way forward
Originally Posted by Dicko&Sarah
what colour is that?
looks like a highline purple colour but gone a bit wrong?

my mate had one and the sills and door bottom had serious rust, it can be patched up but just note everything like thats wrong with it-drive away for a think and then go back. Don't love it from the minute you see otherwise you'll get it home then start noticing that bubble or knock.
But VW are good solid motors in general
But VW are good solid motors in general
Originally Posted by kiddie
my mate had one and the sills and door bottom had serious rust, it can be patched up but just note everything like thats wrong with it-drive away for a think and then go back. Don't love it from the minute you see otherwise you'll get it home then start noticing that bubble or knock.
But VW are good solid motors in general
But VW are good solid motors in general
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: Feb 2008
Posts: 1,406
Likes: 0
From: Essex
Dubs all kool cars just check the electrics work, millage isn't a problem on them, check all the bushs and wheel bearings on the one your looking at because when you lower cars that much they can go very quick. My mate is selling a mint vr6 in silver Ł1400 but he's open to offers on it tho (essex)
this my vdub has ronal turbos on it now
this my vdub has ronal turbos on it now
Originally Posted by Saaamon
Dubs all kool cars just check the electrics work, millage isn't a problem on them, check all the bushs and wheel bearings on the one your looking at because when you lower cars that much they can go very quick. My mate is selling a mint vr6 in silver Ł1400 but he's open to offers on it tho (essex)
this my vdub has ronal turbos on it now
this my vdub has ronal turbos on it now
Any more pics of yours? looks nice from the pic
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: Feb 2008
Posts: 1,406
Likes: 0
From: Essex
go to photobucket http://s244.photobucket.com/albums/gg37/saaamon/ all my pictures are on there, its on fk coilovers, de-wipered with a glass plug, k&n airfilter, tv headunit, poineer sub, componts all round, xbox, drilled n grooved discs uprated pads, fastroad clutch, gti upper grill and gti lower splitter, havn't got any pictures off the ronals on but i paid Ł600 for them and theres a 2month waiting list on them.
early mk3's - ones with square side repeaters - can be fairly rusty, sills, wheel archs, boot lids etc. later ones with the oval side repaters had galvanised steel i believe so less rust worries.
as said, check electrics work. vr6's are the ones to get but i'm a bit biased! and mpg on the 2.8 i get about 19mpg, thats around town doing only short journeys driving like a looney. on a decent run mid to late twenties is easily achievable even when into three figures.
as said, check electrics work. vr6's are the ones to get but i'm a bit biased! and mpg on the 2.8 i get about 19mpg, thats around town doing only short journeys driving like a looney. on a decent run mid to late twenties is easily achievable even when into three figures.
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: Feb 2008
Posts: 1,406
Likes: 0
From: Essex
Originally Posted by GTi_iTG
Its a polo aint it? looks smart either way 

The wheels are base model A3 alloys, just all painted up.
Look cool as fuck, just a bit small for a Mk3 golf really, better suited to a Lupo or similar.
Still deffo the most tasteful and individual Mk3 posted on this thread tho
Just FFS dont put Ronals on it
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs
Look cool as fuck, just a bit small for a Mk3 golf really, better suited to a Lupo or similar.
Still deffo the most tasteful and individual Mk3 posted on this thread tho
Just FFS dont put Ronals on it
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs
I've found that life I needed.. It's HERE!!
iTrader: (2)
Joined: Feb 2008
Posts: 1,406
Likes: 0
From: Essex
Originally Posted by Stavros
Just FFS dont put Ronals on it
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs 
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs 
My wife has a 16 valve mark 3 and although it's just about to reach 140k miles it's been a good car.

On the 96 onwards cars rust isn't such a problem. Hers has leather but I wouldn't say that the cloth ones wear much more. Having had that one nearly 2 years and a VR6 before it there isn't much I can say against them.

On the 96 onwards cars rust isn't such a problem. Hers has leather but I wouldn't say that the cloth ones wear much more. Having had that one nearly 2 years and a VR6 before it there isn't much I can say against them.
Originally Posted by Stavros
The wheels are base model A3 alloys, just all painted up.
Look cool as fuck, just a bit small for a Mk3 golf really, better suited to a Lupo or similar.
Still deffo the most tasteful and individual Mk3 posted on this thread tho
Just FFS dont put Ronals on it
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs 
Look cool as fuck, just a bit small for a Mk3 golf really, better suited to a Lupo or similar.
Still deffo the most tasteful and individual Mk3 posted on this thread tho
Just FFS dont put Ronals on it
Thats only 1 step up the "I have no imagination or taste of my own" ladder from a set of 8 inch wide MOs 
BillyCabrio that looks awesome that does, no shitty body mods just some nice wheels/lights etc, how it should be

By the way this one is a 96-P so it should be fine for rust then

By the way this one is a 96-P so it should be fine for rust then
Originally Posted by peteh
lol just seen your post dicko on the thread i got that pic from, the ones you were asking about are tsw holstons


and its Sarah not Dicko
Originally Posted by GTi_iTG
BillyCabrio that looks awesome that does, no shitty body mods just some nice wheels/lights etc, how it should be

By the way this one is a 96-P so it should be fine for rust then

By the way this one is a 96-P so it should be fine for rust then

and as its a later model wont have the arches, i cant wait to get mine painted and arches removed, they look pants
10K+ Poster!!
iTrader: (1)
Joined: Jun 2003
Posts: 13,450
Likes: 2
From: Dartford, Kent - Home of the two way one way system.
Originally Posted by GTi_iTG
BillyCabrio that looks awesome that does, no shitty body mods just some nice wheels/lights etc, how it should be

By the way this one is a 96-P so it should be fine for rust then

By the way this one is a 96-P so it should be fine for rust then

Originally Posted by Dicko&Sarah
Originally Posted by GTi_iTG
BillyCabrio that looks awesome that does, no shitty body mods just some nice wheels/lights etc, how it should be

By the way this one is a 96-P so it should be fine for rust then

By the way this one is a 96-P so it should be fine for rust then

and as its a later model wont have the arches, i cant wait to get mine painted and arches removed, they look pants













