Brake upgrade - Flushing clutch fluid?

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2008 | 05:36 PM

Gary_ST

Guest

Posts: n/a

Brake upgrade - Flushing clutch fluid?

Shall be fitting some 330m brakes, goodridge lines and Castrol SRF fluid to my ST220 shortly. The clutch uses the same reservoir as the brakes, so do I have to flush that as well? If so hows it done? (Don't want to waste £30 a litre brake fluid by mixing it in with the old stuff)

Cheers.

Feb 16, 2008 | 05:53 PM

dojj

Resident Wrestling Legend

iTrader: (3)

Joined: May 2003

Posts: 50,018

Likes: 259

From: Little India

have you actualy figured out how to flush the clutch fluid out?

then get back to us

Feb 16, 2008 | 06:02 PM

C4llyT

PassionFord Post Whore!!

Joined: Aug 2005

Posts: 4,033

Likes: 0

From: Poole

Slave cylinder will have a bleed nipple on it, surely?
Depending on location, may need pressure bleeding.

Feb 16, 2008 | 09:51 PM

Gary_ST

Guest

Posts: n/a

I know how to bleed the brakes, thats about it

Don't have a clue where to start with the clutch, but I assume it has to be done if I want to get the best out of this Castrol SRF? I could be chatting shit though